Tires, Wheels, & Brakes Discussion about wheels, tires, and brakes for the new MINI.
Sponsored by:
Sponsored by: CARiD

Annoying clicking sound when braking...HELP

Thread Tools
 
Search this Thread
 
Old May 20, 2007 | 03:04 PM
  #1  
tomm9050's Avatar
tomm9050
Thread Starter
|
3rd Gear
Joined: Oct 2006
Posts: 217
Likes: 0
Annoying clicking sound when braking...HELP

I keep hearing clicking sound coming from the rear of the MCS ('06) when
braking around town, it doesn't happen every time, usually under slight pedal
pressure. Any thoughts / solutions or similar occurrences?

Thanks!
 
Reply
Old May 20, 2007 | 05:30 PM
  #2  
CARdiac's Avatar
CARdiac
5th Gear
Joined: Dec 2004
Posts: 959
Likes: 0
From: Near Gaithersburg, MD
Does it sound a lot like a clack.. almost like the brake pads slapping the rotors? I complained shortly after getting my 05 and the dealer "did something" that made it go away... it didn't go away until I replace the stock pads with Redbox pads.
 
Reply
Old May 20, 2007 | 07:48 PM
  #3  
tomm9050's Avatar
tomm9050
Thread Starter
|
3rd Gear
Joined: Oct 2006
Posts: 217
Likes: 0
I had a mechanic (Steve of Steves in Northridge) looked at the pads and didn't see anything / but it does sound like the pads hitting the rotors if I had to guess.

How did you decide on Redbox pads / where did you order them?

thanks
 
Reply
Old May 21, 2007 | 04:16 AM
  #4  
CARdiac's Avatar
CARdiac
5th Gear
Joined: Dec 2004
Posts: 959
Likes: 0
From: Near Gaithersburg, MD
there shouldn't be anything wrong with the pads... some say it is the ABS setting itself... not sure. The redbox pads I bought were the Mintex pads, I bought them for the low dust. My guess is the install included some stop squeel which essentially binds the pads to the caliper with grease.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ECSTuning
Vendor Announcements
0
Aug 19, 2015 12:51 PM
damncajun
Stock Problems/Issues
5
Aug 17, 2015 08:25 PM
ECSTuning
Interior/Exterior Products
2
Aug 7, 2015 09:51 AM
ECSTuning
Vendor Classifieds
0
Aug 7, 2015 08:10 AM
ECSTuning
Vendor Announcements
0
Aug 7, 2015 08:02 AM




All times are GMT -7. The time now is 05:04 AM.