Most vendors *I think* sell 65mm wheel studs. RMW sells 90mm which is excessive. I need something around 70, 75mm. Anyone know where can I find?

Thanks!

 

What size spacers are you trying to use?

 

12mm spacers. I actually currently have the M14x1.25 to M14x1.5 conversion kit that I bought from you. This one is 65mm, and it is not long enough (the bolts are about flush with the studs, makes me nervous). I need at least 70mm.

 

Here, I'm attaching pictures. The wheels are Konig Feather 17"x7 et40 and tires are 215/45 Dunlop Star Spec Direzza. I have BC Racing coilovers which do require 5mm spacers even with stock 16" wheels 195tires. The whole problem is the fronts, rears are fine.


By erhanh at 2012-02-14


By erhanh at 2012-02-14

 

The photos you show above depict that your studs are satisfactory.
Your lugs fully engage after three full rotations, any excess is unnecessary when it comes to threaded bolt design.

- Erik