Suspension Springs, struts, coilovers, sway-bars, camber plates, and all other modifications to suspension components for Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

Suspension Creaking sway bar

Thread Tools
 
Search this Thread
 
Old Dec 22, 2003 | 11:34 AM
  #1  
FLKeith's Avatar
FLKeith
Thread Starter
|
4th Gear
Joined: Mar 2003
Posts: 405
Likes: 1
From: Florida
I have a Madness sway bar from the group buy of last summer. About a week ago I started to get creaks from the rear suspension that got worse every day. I guessed it was the bushings from the sway bar so yesterday I removed the brackets over the bushings and added some regular grease - problem solved!

Has anyone else had this problem? Is this something that will need doing every few months?

I didn't keep the remainder of the grease that came with the sway bar - what type of grease should be used?
Thanks, Keith
 
Reply
Old Dec 22, 2003 | 12:03 PM
  #2  
MiniPilo's Avatar
MiniPilo
6th Gear
Joined: Jan 2003
Posts: 1,882
Likes: 0
From: Wyckoff, NJ
I had the issue, and complained alot about it. I was sent out some collars that fixed the issue. I then took it appart, re greased it, and put the collars on. Not the best way, but it works. It happens from the lateral movement of the bar evacuates the grease from the bushing, and causing that problem. Mine happened just a couple weeks after install. Give them a call, and they should send them out to you.

Thanks
Dan
Pilo Racing
 
Reply
Old Dec 22, 2003 | 01:49 PM
  #3  
vdubdoug's Avatar
vdubdoug
6th Gear
Joined: Aug 2002
Posts: 1,707
Likes: 0
From: Centerville, Ohio
I had a creeking noise and I thought it was the sway bar. I installed an RDR swaybar and the problem still exists (I wanted to upgrade anyway). The Swaybar is not the problem on my car. It is the subframe I think. I have tried to look at the areas were the noise is coming from but when I get the car on a lift it does not do it.


ARRGGHHH
 
Reply
Old Dec 23, 2003 | 09:21 PM
  #4  
Jayar's Avatar
Jayar
3rd Gear
Joined: Nov 2002
Posts: 235
Likes: 0
My Mini Mania bar squeaked terribly when I first got it, but they sent me new bushings and a reinstall fixed the problem. Had the bar on for six or seven months now and it's just now beginning to squeak again. Grease fittings would be nice, but I don't know if they're available for this bar. Annoying is a good word for it. JR
 
Reply
Old Dec 23, 2003 | 09:27 PM
  #5  
paulmon's Avatar
paulmon
4th Gear
Joined: Jan 2003
Posts: 344
Likes: 0
From: Toronto, Canada

The grease you get with the madness bar doesn't like the cold. Get some "Energy Suspension" bushing lube and you'll be all set. Did mine couple of weeks ago and the squeak is all gone. The Energy stuff is teflon based and works to -80c and doesn't absorb water. :smile:

There is a thread on Randy's site about this very thing.

Cheers,

Paul
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
YaTuSabe
MINI Parts for Sale
9
Aug 23, 2018 11:41 AM
gar56
MINIs & Minis for Sale
1
Nov 15, 2016 06:41 AM
bahman
MINIs & Minis for Sale
13
Feb 14, 2016 10:29 AM
vulkandino
MINIs & Minis for Sale
8
Oct 31, 2015 08:29 PM
mauiguyharry
1st Gear
3
Oct 8, 2015 06:53 PM




All times are GMT -7. The time now is 08:59 PM.