Suspension Rear lower control arm
Rear lower control arm
I need to get rear lower arm control for r56. My MCS is lowered on CROSS coilsover.... well i am seeing that im passed the acceptable camber for the rear so i need to correct it...
Looking for Hsport.. i only found one vendor selling for around $240.. any other place you guys recommend?
Looking for Hsport.. i only found one vendor selling for around $240.. any other place you guys recommend?
There is no difference between this part on the 1st and 2nd generation MINI's so any of the ones you see listed for R50/52/53 will work fine.
I am biased as live near and beta test for Texas Speedwerks. Worth looking I think.
I am biased as live near and beta test for Texas Speedwerks. Worth looking I think.
what you guys think?
Hsport rear lower control arm
http://www.tirerack.com/suspension/s...800&perfCode=A
Hsport sways
http://www.tirerack.com/suspension/S...egory=AntiRoll
THere are three kits available. 19mm, 25mm, and front and back one for $190.. i think the last one is best deal but do i need the fronts? I think rear is the most crucial no?
BTW... how long you think i start to notice irreversible uneven wear on my new tires?I just got some Eagle F1s. 201/50/16 from tirerack... i put about 500 miles... car has Cross c/o already... no alignment done
The car veers to the right now... haha yes i can go lower... all around... but i need to get rest of the suspension parts before i get an alignment... then ill be done with suspension...

Hsport rear lower control arm
http://www.tirerack.com/suspension/s...800&perfCode=A
Hsport sways
http://www.tirerack.com/suspension/S...egory=AntiRoll
THere are three kits available. 19mm, 25mm, and front and back one for $190.. i think the last one is best deal but do i need the fronts? I think rear is the most crucial no?
BTW... how long you think i start to notice irreversible uneven wear on my new tires?I just got some Eagle F1s. 201/50/16 from tirerack... i put about 500 miles... car has Cross c/o already... no alignment done
The car veers to the right now... haha yes i can go lower... all around... but i need to get rest of the suspension parts before i get an alignment... then ill be done with suspension...

Last edited by Doc Cooper; Dec 18, 2008 at 04:01 PM.
all u need and be really happy with is the control arms and the 19mm REAR only,(absolutely no reason for front bar-and good luck installing it! if u do get it) the 19mm bar has three settings and is great for the street and the track
Thread
Thread Starter
Forum
Replies
Last Post
R50/53 Guidance on selling a 2005 S
Toolman
R50/R53 :: Hatch Talk (2002-2006)
8
Jan 20, 2016 06:50 AM
Minibeagle
Stock Problems/Issues
6
Aug 13, 2015 10:00 AM



