Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

Window not working, but hear motor

Thread Tools
 
Search this Thread
 
Old Sep 23, 2017 | 09:06 PM
  #1  
Newby05mcs's Avatar
Newby05mcs
Thread Starter
|
1st Gear
Joined: Jun 2014
Posts: 43
Likes: 1
Window not working, but hear motor

Hello

My wifes r53 p/s window will not go up or down. I can hear the motor whining etc, but no window movement.

I have read through posts and hit the door etc, I've pulled the door panel off and tried to gently tug on things, but not sure whats going on.

I can manually move the window by grabbing it and moving it up and down, but I don't really know what to do at this point. It doesn't "look" like anything is off track/not connected etc.

any suggestions?

Frank
 
Reply
Old Sep 23, 2017 | 10:03 PM
  #2  
Newby05mcs's Avatar
Newby05mcs
Thread Starter
|
1st Gear
Joined: Jun 2014
Posts: 43
Likes: 1
Just fyi, I have tried disconnecting battery for a few min in hopes it would reset things, but this didnt work
 
Reply
Old Sep 24, 2017 | 10:15 AM
  #3  
Tigger2011's Avatar
Tigger2011
Alliance Member
10 Year Member
iTrader: (1)
Joined: Jul 2013
Posts: 1,474
Likes: 248
From: Sunrise, FL
Had the same issue on my first Mini a 2006. Had to replace motor and gear assembly as it was stripped.
 
Reply
Old Sep 24, 2017 | 01:29 PM
  #4  
Newby05mcs's Avatar
Newby05mcs
Thread Starter
|
1st Gear
Joined: Jun 2014
Posts: 43
Likes: 1
I appreciate it. Is it possible the gear assembly be stripped and the motor still good, or these go hand in hand etc.

thank you in advance!
 
Reply
Old Sep 24, 2017 | 01:37 PM
  #5  
Newby05mcs's Avatar
Newby05mcs
Thread Starter
|
1st Gear
Joined: Jun 2014
Posts: 43
Likes: 1
I usually buy my parts at outmotoring.com, waymotorworks, or rockauto.com. It says if you hear a click and not sound, then the motor is out; if you hear the motor, but no movement, then the regulator is out.

Does that sound right to you Tigger?
 
Reply
Old Sep 24, 2017 | 01:48 PM
  #6  
Tigger2011's Avatar
Tigger2011
Alliance Member
10 Year Member
iTrader: (1)
Joined: Jul 2013
Posts: 1,474
Likes: 248
From: Sunrise, FL
In my case the plastic gear sheared so the motor would spin but nothing would happen. Was actually a good thing since I was able to pull it up by hand.
 
Reply




All times are GMT -7. The time now is 09:03 AM.