Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Clubman (R55), Cooper and Cooper S(R56), and Cabrio (R57).

Rough and Puffy

Thread Tools
 
Search this Thread
 
Old Aug 8, 2017 | 12:18 PM
  #1  
sadclubman's Avatar
sadclubman
Thread Starter
|
Neutral
Joined: Aug 2017
Posts: 1
Likes: 0
Rough and Puffy

I need help, I have a 2010 Clubman non turbo with 122k on it and auto trans. I recently replaced the vanos solenoid, one cam shaft position sensor ( I did not realize there are two at the time, valve cover gasket, plugs, and one coil pack that was bad. All of which helped my problem quite a bit. However I still am having problems accelerating, it will stall occasionally and after driving about 15-20 minutes it will "diesel" and then blow a cloud of white/blue smoke out of the exhaust. We have always run 93 in it since we purchased it (used) oil changes are done regularly. Original problems, sorry I don't remember the codes, dealt with multiple misfires, bad cam shaft sensor, and something else. When I had the valve cover off I inspected timing chain ect. all of which looked fine ie nothing broken or missing. I also have a very uneven idle at low RPMs. Any help would be appreciated. Thank you.
 
Reply
Old Aug 10, 2017 | 08:42 AM
  #2  
MiniToBe's Avatar
MiniToBe
6th Gear
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
Joined: Jan 2015
Posts: 4,339
Likes: 437
From: Philadelphia PA
where are you located and can you post a picture. Please do scan the car and provide codes.
 
Reply




All times are GMT -7. The time now is 09:29 AM.