Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

Cvt not showing any select letter in claster

Thread Tools
 
Search this Thread
 
Old Feb 19, 2017 | 03:53 AM
  #1  
slide mini's Avatar
slide mini
Thread Starter
|
2nd Gear
Joined: Dec 2014
Posts: 51
Likes: 0
Cvt not showing any select letter in claster

hello everybody

I have my Mini Cooper 2002 r50
the transmission not changing speed fine
after rpm 5 it's change speed

and there's something different
before showed EP and know after I replaced transmission its same before problem

But no EP no XP no P

i replaced cvt module
and relay
I checked all fuses
I replaced engine wiring harness

i have fault code : measuring speed sensor
​​​​​​​

see photo
 

Last edited by slide mini; Feb 19, 2017 at 03:59 AM.
Reply
Old Feb 23, 2017 | 07:28 AM
  #2  
My Mini Is Gold's Avatar
My Mini Is Gold
Neutral
Joined: Sep 2016
Posts: 7
Likes: 0
When the transmission was rebuilt was it run through the gears properly? I had a problem with my CVT and after replacing the fluid and adding a serum from oilextreme.com it worked a lot better but I needed to run through all of the gears. On this site in the DIY section there is a reference on how to go through the gears properly. Not sure if this would help but that's my 2 sense.
 
Reply




All times are GMT -7. The time now is 04:41 AM.