FS:: Resistors for Air Bag Light (For Seat Conversion )

#1

08-11-2014, 08:20 AM

-=gRaY rAvEn=-

Moderator

Thread Starter

iTrader: (43)

Join Date: Aug 2008

Location: Cape of Cod

Posts: 5,809

Likes: 25

Received 64 Likes on 54 Posts

Resistors for Air Bag Light (For Seat Conversion )

Category: Interior
Price: $5
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R50, R52, R53
Location (Region): NorthEast
Item Condition: Brand New

Conent and photos removed.
You have Robb M. from IB to thank for that...

Last edited by -=gRaY rAvEn=-; 12-14-2017 at 07:55 AM. Reason: location

Like

#2

08-11-2014, 12:50 PM

dillonmr

1st Gear

Join Date: Aug 2011

Posts: 11

Likes: 0

Received 0 Likes on 0 Posts

just a alternative for ppl. You can solder 2 pin connectors to either end of the resisters that gray raven is selling that allows you to plug the resister straight into the airbag connector in the car's wiring loom thus meaning you dont have to cut the connectors off the seats or buy new plugs. I did mine a cpl years back and perfect. put bit of insulation over the resister and heat-shrink over the plug to protect it. Never had any issues so just get yourself the resisters and jobs a goodin

Like

#3

08-11-2014, 05:17 PM

miles_miles7

5th Gear

iTrader: (4)

Join Date: Nov 2007

Location: California

Posts: 607

Likes: 0

Received 2 Likes on 2 Posts

Subscribed.

Like

#4

08-11-2014, 06:32 PM

ImThaBean

2nd Gear

Join Date: Oct 2013

Location: MidMich

Posts: 93

Likes: 0

Received 2 Likes on 2 Posts

Now, isn't this for pre-face lift gen 1's? Cause I have a post-face lift and I heard there are issues cause they added the weight sensor into the seat cushion.

Like

#5

08-12-2014, 02:47 AM

-=gRaY rAvEn=-

Moderator

Thread Starter

iTrader: (43)

Join Date: Aug 2008

Location: Cape of Cod

Posts: 5,809

Likes: 25

Received 64 Likes on 54 Posts

Quote:

Originally Posted by ImThaBean

Now, isn't this for pre-face lift gen 1's? Cause I have a post-face lift and I heard there are issues cause they added the weight sensor into the seat cushion.

Conent and photos removed.
You have Robb M. from IB to thank for that...

Last edited by -=gRaY rAvEn=-; 12-14-2017 at 07:56 AM.

Like