Road Racing Discussion Interested in taking your MINI road racing? Find out what you need to do to get your MINI ready!

SCCA time trial at CMP

Thread Tools
 
Search this Thread
 
Old May 17, 2018 | 06:04 AM
  #1  
MrBlah's Avatar
MrBlah
Thread Starter
|
6th Gear - AX Champion
15 Year Member
Liked
Loved
Joined: Mar 2007
Posts: 3,296
Likes: 297
From: Pittsboro NC
SCCA time trial at CMP

anyone else going to the SCCA time trial? They made a lot of changes to the program, gone are the days of requiring a full race car with roll & fire protection

I'm taking my r53, scca hates na/supercharged cars with engine mods, it stuck me in max 3

https://www.scca.com/events/1991815-...er-time-trials
 
Reply
Old May 29, 2018 | 04:50 AM
  #2  
MrBlah's Avatar
MrBlah
Thread Starter
|
6th Gear - AX Champion
15 Year Member
Liked
Loved
Joined: Mar 2007
Posts: 3,296
Likes: 297
From: Pittsboro NC
I saw 3 mini's participating, a justacooper r50 in advanced with me, and a r53 in intermediate. The other r53 had a belt failure, I hooked him up with one of my spares but it would not make boost, probably a crank pulley failure.

I had a great time, they did 3 20min sessions each day, after the track sessions we did a timed session with autocross timing gates on half the track, saturday the west half, sunday the east half.

I did pretty good, 2nd place in class and 23st fastest on track out of 120 cars. I'm consistently running 1:53's now, my time on rs4 and re71r is basically the same.

This was my best lap saturday am, was in the first session




 
Reply
Old Jun 13, 2018 | 05:47 PM
  #3  
joeminimd's Avatar
joeminimd
Neutral
Joined: Jun 2018
Posts: 3
Likes: 0
You said that you ran a r50, what was your setup on it? I have an `06 I wouldn't mind running if possible, just not sure what I need, just joined SCCA this year.
 
Reply
Old Jun 14, 2018 | 04:12 AM
  #4  
MrBlah's Avatar
MrBlah
Thread Starter
|
6th Gear - AX Champion
15 Year Member
Liked
Loved
Joined: Mar 2007
Posts: 3,296
Likes: 297
From: Pittsboro NC
I run an r53 but the setup is the same, all you need to start is track brake pads

I would add camber and stiffer rear from sway or spring for tire wear prevention after that. The r50 had those changes and a header
 
Reply




All times are GMT -7. The time now is 09:06 PM.