Wheel Bearing Maybe?
Wheel Bearing Maybe?
Hello,
So back in early May I swapped my snow tires/wheels for my summer tires/wheels. The car then sat in the garage for six weeks while I saw away. When I returned it had a loud whining sound in the front end. It sounded like a bear bearing, but it was perfectly fine prior and had just been sitting. Also I had replaced all the wheel bearing less than maybe 10-12K miles ago. I though it may be a bad tire, although it did not sound like one, so I put the snows back on,no change, no big surprise. So now my question(s). Can a wheel bearing go bad just from sitting too long? Is there something else wrong that sound like a wheel bearing, that also can go bad just from sitting? Oh,.2014 PaceMan S 65K Miles
Thanks!
Jack
So back in early May I swapped my snow tires/wheels for my summer tires/wheels. The car then sat in the garage for six weeks while I saw away. When I returned it had a loud whining sound in the front end. It sounded like a bear bearing, but it was perfectly fine prior and had just been sitting. Also I had replaced all the wheel bearing less than maybe 10-12K miles ago. I though it may be a bad tire, although it did not sound like one, so I put the snows back on,no change, no big surprise. So now my question(s). Can a wheel bearing go bad just from sitting too long? Is there something else wrong that sound like a wheel bearing, that also can go bad just from sitting? Oh,.2014 PaceMan S 65K Miles
Thanks!
Jack
Yep, they can rust and one spot and the bearing can have one of the ball bearings get a ruff spot on it. I have had this happen with other cars.
The back of the bearing will rust over time and the seal that is on the back lets water and gunk in, once that happen the bearing starts to go.
https://www.ecstuning.com/Mini-2014-...heel_Bearings/
The back of the bearing will rust over time and the seal that is on the back lets water and gunk in, once that happen the bearing starts to go.
https://www.ecstuning.com/Mini-2014-...heel_Bearings/
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Yep, they can rust and one spot and the bearing can have one of the ball bearings get a ruff spot on it. I have had this happen with other cars.
The back of the bearing will rust over time and the seal that is on the back lets water and gunk in, once that happen the bearing starts to go.
https://www.ecstuning.com/Mini-2014-...heel_Bearings/
The back of the bearing will rust over time and the seal that is on the back lets water and gunk in, once that happen the bearing starts to go.
https://www.ecstuning.com/Mini-2014-...heel_Bearings/
Thanks!
Jack
Thread
Thread Starter
Forum
Replies
Last Post
JDPaddle
Tires, Wheels, & Brakes
13
Apr 15, 2021 11:30 AM
Fishbreath
Stock Problems/Issues
4
Mar 7, 2016 03:03 PM







