R56 :: Hatch Talk (2007+) MINI Cooper and Cooper S (R56) hatchback discussion.
Sponsored by:
Sponsored by:

R56 Rear Bumper Fasteners

Thread Tools
 
Search this Thread
 
  #1  
Old 08-11-2017, 11:17 AM
Chalfish's Avatar
Chalfish
Chalfish is offline
Neutral
Thread Starter
Join Date: Aug 2017
Posts: 2
Received 0 Likes on 0 Posts
Rear Bumper Fasteners

Hello everyone,

I'm new to this forum and have been having trouble finding the specific information I am looking for.

I had a trailer hitch installed by U-Haul on my 2010 Cooper S awhile back and because I am a knucklehead at times, I did not inspect everything regarding the installation.
Anyways, it turns out the team that did the install did not reinstall the bumper cover fully and scrapped most of the fasteners although they had me convinced it was all done properly... (all the alignments were nice and fit properly most likely with false or incorrect fasteners/zipties) after a few months the bumper cover has begun to sag revealing the missing mounting components.
Both wheel well liners are missing their fasteners and I have not yet removed the trim to check the fasteners there.

I have found the how-tos to take off and reinstall the bumper 10 times over but cannot manage to find the replacement pieces/sizes etc. needed to properly mount it.
The plan would be to get all of the mounting fasteners and remove/reinstall the bumper properly with all new components.

Could someone please provide a list of all of the bolts, screws, fasteners, clips etc. and their sizes?
Or provide a link to information I seek? The OEM information I found is unclear on the subject.

Thanks in advance
I appreciate the help
 
  #2  
Old 08-11-2017, 02:13 PM
3lusive's Avatar
3lusive
3lusive is offline
5th Gear
iTrader: (2)
Join Date: Nov 2011
Location: Sacramento, CA
Posts: 950
Received 53 Likes on 46 Posts
http://www.realoem.com/bmw/enUS/show...diagId=51_6228

This may help - cross reference the part numbers for fasteners and screws to ecstuning or some other website where you can purchase them. I haven't taken off the rear bumper myself so I can't say if there's anything missing from the diagram but hope this is a good place to start
 
The following 2 users liked this post by 3lusive:
Chalfish (08-15-2017), ECSTuning (08-23-2017)
  #3  
Old 08-22-2017, 06:39 AM
Chalfish's Avatar
Chalfish
Chalfish is offline
Neutral
Thread Starter
Join Date: Aug 2017
Posts: 2
Received 0 Likes on 0 Posts
Thanks 3lusive for the help getting the right fasteners.

https://assets.curtmfg.com/masterlib..._11130_INS.PDF
This is by far the best fastener diagram plus instructions I have come across. I hope this helps anyone that runs into the missing fastener issues.
 
  #4  
Old 08-23-2017, 05:36 AM
ECSTuning's Avatar
ECSTuning
ECSTuning is online now
Platinum Sponsor
Join Date: Jan 2013
Location: Wadsworth, Ohio
Posts: 34,808
Received 1,966 Likes on 1,766 Posts
From that PDF

A: 72128244969 https://www.ecstuning.com/b-genuine-...128244969~oem/

B: 07130702966 https://www.ecstuning.com/Search/Sit...h/07130702966/

C: 07147146367

https://www.ecstuning.com/b-genuine-...h/07147146367/


D: 51481915964

https://www.ecstuning.com/b-genuine-...481915964~oem/
 
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172




All times are GMT -7. The time now is 06:12 AM.