When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Is your pulley completely seated and in line with the other pulleys? If it is out just a fraction, it will chew up a belt. It may also be too tight. Did you replace or move any other accessory components?
I just replaced the idler pulley belt tensioner and the crank pulley. As soon as I started the car, I heard a noise and it was the belt shredding on the inside edge
I just replaced the idler pulley belt tensioner and the crank pulley. As soon as I started the car, I heard a noise and it was the belt shredding on the inside edge
this was happening to me a few years back. turned out to be my supercharger pulley which was out of line. I would advise you check it if you have an aftermarket pulley installed.
this was happening to me a few years back. turned out to be my supercharger pulley which was out of line. I would advise you check it if you have an aftermarket pulley installed.
This.
I have the WMW pulley that backed out a few cm and it shredded a belt. Then it kept kicking belts off.
Also, put a wrench on all of the pulleys to make sure they are tightened
