I finally was able to get my hands on a 3 pin blower fan. After installing it I turned on the car and noticed that when I tried to turn the ac on nothing happened, Double checked all connections and fuses and still no power to the ac controls. Have any of you guys had this issue before? Any advice will be greatly appreciated.

 

there is no cold, no hot air coming out? no fan? no ac compressor kicking?

 

There seems to be no power going to the automatic controls since none of the lights come up.

 

did you accidentally unplug the controller? double check the connectors and press them firmly.

 

I unplugged them when I removed the dash to get to the blower fan. It's a 2003 Mini S. But I made sure everything was plugged in before trying to turn the ac on.

 

if it isnt a hassle, try to check them again. I am not too familiar with R53 but, did you disconnect the battery and reconnect to reset the module?