hey guys, I was going to wrap my R53' A Panels and was wondering if any of you have done it before, could tell me how much CF Vinyl you needed to make it work?
Thanks!
also if you have any tip's i'll take those as well :D

 

the vinyl is not going to shrink, so just max width X max height. I'd allow at least 1/4 inch buffer to roll over the edges.

the panels should not require much stretching, but keep a hairdryer handy for kinks.

 

Assuming your buying a 48'' tall piece you'll only need 2' length of it, and will have some leftover as the panel is only about 26'' tall or somewhere around there..