FS:: GP Wing by Fubrication
#1
GP Wing by Fubrication
Category: Exterior
Price: $350
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R53, R56
Location (Region): Midwestern
Item Condition: Used
In good shape, includes everything needed except bolts and spacers for mounting. Each car’s fitment could be a bit different so best bet is to just get some hardware from your local store.
Has 3 little nicks in the paint as pictured that could be hit with a touch up kit.
New prices from dealers:
• Orranje wing (currently sold out) - $632 after paint and shipping
• WMW - $720 after shipping (unpainted)
• Fubrication (No Longer Available) - $470 after shipping (unpainted)
$350 plus shipping. Located in Kansas City. Thanks!
![](https://cimg9.ibsrv.net/gimg/www.northamericanmotoring.com-vbulletin/2000x1504/007756a7_a627_46c6_aa12_4718e569d348_f663b985aee89f120fc99d0f5add53afba95b120.jpeg)
![](https://cimg0.ibsrv.net/gimg/www.northamericanmotoring.com-vbulletin/2000x1504/60df1633_cb8c_4ce8_87c5_e1007a55649b_9d1b8c95d7a81c99b38524512b0bd46bbefb4846.jpeg)
![](https://cimg1.ibsrv.net/gimg/www.northamericanmotoring.com-vbulletin/2000x1504/60146d78_71e5_48de_8a9e_80c35d63883d_d3c6475156af18f9a5eb38b1322ad5bd50e0f849.jpeg)
![](https://cimg2.ibsrv.net/gimg/www.northamericanmotoring.com-vbulletin/2000x1504/ddd1a4cb_a6aa_4cb8_b8e2_4db0d7c4eaba_d0e42542c598d528116d384ca039577059c53b1e.jpeg)
![](https://cimg5.ibsrv.net/gimg/www.northamericanmotoring.com-vbulletin/2000x1504/e1df168e_8086_4cc9_8710_43d0179fc220_c04a7586f421fee34c382dd0202108c2a5dff569.jpeg)
![](https://cimg6.ibsrv.net/gimg/www.northamericanmotoring.com-vbulletin/2000x1504/3fa88a49_4c70_4b2d_8bc3_12efa0e009d7_9233a97c5424346dbe08ac8816acde3d258cd38c.jpeg)
Last edited by Alex Hamby; 12-02-2019 at 02:27 PM.
#7
Trending Topics
#10
Nothing really special or proprietary about the hardware with these spoilers, and you had to provide your own washers to stack as spacers for the brackets.
I didn’t use anything FUbrication provided when I mounted mine. I went with machine screws and rivnuts with nylon spacers for the uprights. Since I didn’t use the finned covers for the blade bolts on the uprights, I countersunk the holes and used flat head stainless Allen screws instead of the supplied truss head machine screws.
I didn’t use anything FUbrication provided when I mounted mine. I went with machine screws and rivnuts with nylon spacers for the uprights. Since I didn’t use the finned covers for the blade bolts on the uprights, I countersunk the holes and used flat head stainless Allen screws instead of the supplied truss head machine screws.
Thread
Thread Starter
Forum
Replies
Last Post