PDX MINI Club The PDX MINI Club Forum. Visit our club site at www.pdxmini.org

Rear Bumper Replacement Options

Thread Tools
 
Search this Thread
 
Old May 1, 2007 | 10:02 AM
  #1  
Methius's Avatar
Methius
Thread Starter
|
2nd Gear
Joined: Apr 2007
Posts: 120
Likes: 0
From: Portland, OR
Rear Bumper Replacement Options

All

When we bought our MINI, it came with a couple dings in the rear bumper... and the rest of the car is pretty much flawless. I have a couple questions as I look to fix the problem. The flaws are too big to simply use touch-up paint as a cover up.

1. Is there a forum / newsgroup / website that specialized in USED MINI parts? I was thinking it would probably be less expensive to pick up a used bumper (ideally in LY) from someone that bought a GFX kit or something.

2. If there isn't really a market for used MINI bumpers, has anyone had experience with the Chrome bumper covers? I think they look kidna hokey but I could be wrong.

3. If I were to go the somewhat more expensive route, where in PDX would you recommend having the work done? This may be a dumb questions, but I really don't have a great deal of knowledge as to where to get body work done. I have only lived here a couple years and never had the need for a body shop. Any guesses for a potential cost?

Thanks!
Matt
 
Reply
Old May 1, 2007 | 10:30 AM
  #2  
iceckid's Avatar
iceckid
3rd Gear
Joined: Sep 2006
Posts: 273
Likes: 0
From: Or?
Dont know about used bumpers or covers, but... I have heard great things about Nu-Way Body on NE Grand. If was ever to get anything done on my car I would look there. They do a lot of work for Rasmussen
 
Reply
Old May 2, 2007 | 04:28 PM
  #3  
Thinker2112's Avatar
Thinker2112
5th Gear
20 Year Member
Liked
Loved
Community Favorite
Joined: Jun 2005
Posts: 824
Likes: 87
Assuming your MINI is a 02 - 04 and you go with DIY putting on the chrome bumpers, there is a bit of cutting that is needed. The factory ones, like what is on my car, have tabs that snap into slots that are cut into the bumper. I have seen the instructions for the bumper inserts and there is no mention of cutting for tabs. A Dremmel tool will make quick wrok of the job though.

Otherwise, go with a shop, couldn't cost too much to have them installed, perhaps more than they are worth though. NuWay is great, the owners and a few people that work there own MINI's. I've had paint work there, they did a fantastic job.

Don't know any one that has a LY Cooper that went with the Aero Kit.

Good luck.
 
Reply
Old May 2, 2007 | 04:30 PM
  #4  
Thinker2112's Avatar
Thinker2112
5th Gear
20 Year Member
Liked
Loved
Community Favorite
Joined: Jun 2005
Posts: 824
Likes: 87
Just saw your car in the other thread, you have a S, never mind. Go with a shop as the cooper bumpers more than likely will not fit on your S.
 
Reply
Old May 2, 2007 | 08:43 PM
  #5  
Methius's Avatar
Methius
Thread Starter
|
2nd Gear
Joined: Apr 2007
Posts: 120
Likes: 0
From: Portland, OR
Thanks all for your advice! I ended up buying a new bumper from a fellow NAM'er for $150 shipped. I figure I can have it painted and installed at the place you both suggested.

Thanks again!
 
Reply
Old May 3, 2007 | 10:37 AM
  #6  
JCW Driver's Avatar
JCW Driver
6th Gear
iTrader: (3)
Joined: Sep 2004
Posts: 1,243
Likes: 0
From: Portland, Oregon
Shoot! I was gonna offer to sell you my red one that I took off to install the aero kit.

Yes, Nuway is your best bet. They can do a MINI bumper with thier eyes closed. They do all of Rasmussen's, and did my car. Looks fantastic.
 
Reply
Old May 23, 2007 | 11:06 AM
  #7  
oracle_head's Avatar
oracle_head
Neutral
Joined: Mar 2007
Posts: 3
Likes: 0
Still looking to sell your red bumper?

I need one for my 2003 MCS.
 
Reply
Old May 23, 2007 | 12:38 PM
  #8  
Methius's Avatar
Methius
Thread Starter
|
2nd Gear
Joined: Apr 2007
Posts: 120
Likes: 0
From: Portland, OR
Dang, someone find me a yellow one! I have a black one sitting in my garage and I don't want to paint it
 
Reply
Old May 23, 2007 | 12:42 PM
  #9  
Methius's Avatar
Methius
Thread Starter
|
2nd Gear
Joined: Apr 2007
Posts: 120
Likes: 0
From: Portland, OR
Originally Posted by oracle_head
I need one for my 2003 MCS.
Not sure on fitmint from a 2006 to a 2003 (I assume all R53's are the same)?

check this post out

https://www.northamericanmotoring.co...ad.php?t=98060
 
Reply
Old May 24, 2007 | 11:41 AM
  #10  
oracle_head's Avatar
oracle_head
Neutral
Joined: Mar 2007
Posts: 3
Likes: 0
Thanks. I pm'd the person who started that thread.
 

Last edited by oracle_head; May 24, 2007 at 11:42 AM. Reason: wrong thread
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
Jul 16, 2020 12:54 PM
Minibeagle
Stock Problems/Issues
6
Aug 13, 2015 10:00 AM
skippermini
1st Gear
6
Aug 12, 2015 10:05 PM
ECSTuning
Vendor Announcements
0
Aug 7, 2015 08:02 AM
bctf1
F55/F56 :: Hatch Talk (2014+)
9
Aug 6, 2015 12:55 PM




All times are GMT -7. The time now is 05:47 PM.