Hi everyone,

I'm currently in the process of retrofitting rear PDC to my F56.

The instructions for the official retrofit kit say to ground the wiring harness to a ground point below the front right seat.

Unfortunately, the instructions were written for left-hand drive cars, and I've got a right-hand drive car which is missing the ground point under the seat.

There is a ground point just below the OBD port in the footwell.

My question is, can I use any ground point in the car - or does it need to be the ground point mentioned in the instructions?

Many thanks!

 

Any ground point is probably fine, just make sure it’s a clean point