Hello, I have a 2008 r56 mini cooper s. As a fyi, I had to swap the fuse box earlier this year for a non seat related issue, ( fuse box swap didn't fix the issue ) Scene then the seat warmers didn't work after the fuse box swap. So I though i'd start there. I have power at fuse #39 and #40 https://www.newtis.info/tisv2/a/en/r...s-side/ctU5vsz , no power at fuse #32. Also the used box is missing fuse # 41 https://www.newtis.info/tisv2/a/en/r...-fuse/6qPQq4dy and it works the pass seat heat module. I have put a fuse in that slot but there is no tabs for the fuse to be used in that slot and the fuse falls out. So any thoughts as what to do next ? The lights above the heater switches do not light up at all. Should I swap the old box back in, or further figure out why I don't have power at fuse #32

thx for any help

 

after 226 views, i'm going to swap the fuse box, and hope that was my problem. i'll update the post when i'm done.

 

It would probably help if you posted in the second gen forum instead of the first gen.

 

sorry, i'm new to posting here still. thanks i'll repost it over on the mark 2 area.