General MINI Talk Shared experiences, motoring minutes, and other general MINI-related discussion that applies to all MINIs, regardless of model, year or trim.
Sponsored by:
Sponsored by:

Looking for body parts..wait, let me rephrase that

Thread Tools
 
Search this Thread
 
Old Apr 16, 2017 | 11:56 AM
  #1  
Mithrandir's Avatar
Mithrandir
Thread Starter
|
1st Gear
Joined: Apr 2016
Posts: 24
Likes: 0
From: Las Vegas
Looking for body parts..wait, let me rephrase that

Hi all, where would I find body colored side skirts or rocker panels? I have a 2013 MCS in Pepper White and would love to change the black pieces under the doors and between the wheel arches. Any suggestions are appreciated. Thanks!
 
Reply
Old Apr 16, 2017 | 12:53 PM
  #2  
isamin's Avatar
isamin
4th Gear
Joined: Feb 2013
Posts: 418
Likes: 16
Go to a body shop supply store and have them mix 2 cans of pepper white ( #850 ?? ) basecoat ,1 can of satin gloss clear, & 1 can high fill lite grey primer.
Don't go crazy sanding as the primer takes care of this.
Lay on umpteen coats of the white.
Using the satin is a matter of personal choice because of the area
-high gloss will work but will be less durable.
Paints will run you about $60 or so but your labor is PRICELESS.
Pro body shop will run you around $400-$600 and you just know that it will probably be JUST WHITE and not PEPPER WHITE (vanilla?).
I did this mod on my first MINI and the effect completely changes the car . Looks great.
Do it !
ISAMIN
 
Reply
Old Apr 16, 2017 | 01:01 PM
  #3  
Mithrandir's Avatar
Mithrandir
Thread Starter
|
1st Gear
Joined: Apr 2016
Posts: 24
Likes: 0
From: Las Vegas
isamin, thanks that sounds relatively easy. About how long did that take you to apply? Did you do the arches also?
 
Reply
Old Apr 17, 2017 | 01:42 PM
  #4  
ECSTuning's Avatar
ECSTuning
Platinum Sponsor
10 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2013
Posts: 36,748
Likes: 2,543
From: Wadsworth, Ohio
Make sure they are prepped and sanded well otherwise you might get a textured look, unless that's what you are going for. I used to do allot of body work.

If you are trying to find factory painted ones, they will be hard to find, unless you have a Clubman (we have those kits). Most MINI thats had factory painted arches / rocker panels were Sport Aero body kits and some JCW body kit cars. If you are trying to find used.

https://www.northamericanmotoring.co...r-is-this.html






https://www.northamericanmotoring.co...el-arches.html


 
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Reply
Old Apr 18, 2017 | 07:59 AM
  #5  
isamin's Avatar
isamin
4th Gear
Joined: Feb 2013
Posts: 418
Likes: 16
Yes, I also painted the arches and the entire perimeter of the car. You will have to do some serious sanding on the arches and you get a fine white grated cheese dust that is PIA. Craftsmanship in this area is paramount and several layers of high gloss clearcoat help.
P

anel removal is a must so you can use the car while the paint is setting.
Check the pix above this post.
Lot of work but worth it.
ISAMIN
 
Reply




All times are GMT -7. The time now is 03:36 PM.