Has anyone got the chrono kit installed and is using the jb4 from burger motor sport ? I just want to no if they work together withought problems.

 

I see no one has replied. I can't imagine that they wouldn't. The gauges aren't plugged into the OBD2 port so there would be no conflict.

 

If you do have two things that run off the OBD II all you need is a Y cable,or splitter. On my R56 I was running a set of Cravenspeed nGauges and a ScanGauge II simultaneously with no problems.

 

Vetsvette is correct. But you can't run the JB4 in conjunction with anything else...because that will cause the JB4 to get faults according to Terry. In fact they changed the plug for that reason.

 

Well, that sucks! I'm running the NM anyway, but if I were shopping for a Module this would weigh heavily on my decision. I've got to have my ScanGauge II!

 

the chrono kit is factoty linked to the obd harnes terry was mot sure if it would clash but as one of the chrono gauges is boost and the jb4 has a boost setting i think i would have problems so thats why i have been asking to see if any one has this set up.