Drivetrain Anyone have Manic stage 2 tune in PA?
#1
#3
#6
#7
State Inspection
Had my inspection done 2 weeks ago... running on Manic Stage 2 Map B with all its requirements including a catless DP. I passed...
Basically, what took place was once the emissions got plugged in...the report stated N/A or a readiness issue. I had to switch to Map A (stock) and drove the car normally for exactly 12 miles hoping that the check engine light would not come on. Had it retested and it passed. Once I left the inspection station the check engine light came on the 13th mile driven and switch it back to Map B and I was on my way.
As you know a CEL is an auto fail so it is critical that you switch to Map A a few miles (12 miles in my case) before you reach the inspection station to avoid any unforeseen delays.
The inspection station is Swedish Motors located in Marrietta, PA. Call Shane at (717)426-2202 for an appointment.
Hope this helps and best of luck!
Basically, what took place was once the emissions got plugged in...the report stated N/A or a readiness issue. I had to switch to Map A (stock) and drove the car normally for exactly 12 miles hoping that the check engine light would not come on. Had it retested and it passed. Once I left the inspection station the check engine light came on the 13th mile driven and switch it back to Map B and I was on my way.
As you know a CEL is an auto fail so it is critical that you switch to Map A a few miles (12 miles in my case) before you reach the inspection station to avoid any unforeseen delays.
The inspection station is Swedish Motors located in Marrietta, PA. Call Shane at (717)426-2202 for an appointment.
Hope this helps and best of luck!
Trending Topics
#8
Benga what else do you have done to your car? I deffinitly am wanting to do my car up soon. And that's not to far I'll keep them in mind. I keep seeing that 43mm hybrid turbo and well... Yeah lol eventually.
Pa is super easy as long as you find a friendly shop. If you find a smaller shop they can make almost anything pass
Pa is super easy as long as you find a friendly shop. If you find a smaller shop they can make almost anything pass
Last edited by bobo1563; 10-04-2016 at 06:57 PM.
#9
Thread
Thread Starter
Forum
Replies
Last Post
Bea5tMa5ter
MINI Parts for Sale
12
05-11-2016 05:10 PM
ECSTuning
Vendor Classifieds
0
04-28-2016 06:10 AM
ECSTuning
Drivetrain Products
0
04-28-2016 06:09 AM
ECSTuning
Vendor Announcements
0
04-28-2016 05:32 AM