Need some help here. I have a 2004 MCS with team dynamic rims. The Flat Tire indicator is on but I do not have the reset button on the hand brake. How do you reset without the button?

 

The button is under the e-brake, not on the e-brake

owners manual page 62 ....

http://www.minimania.com/pdfile/2004...847.1461717722

The system must be re-initialized
immediately after changing a tire
and wheel, or after correcting the pressure
in any tire. This requires a bit of driving.
<
1. Before a journey, start the engine, but do
not start driving
2. Press the button long enough for the
indicator lamp in the display elements to
light up for a few seconds
3. Drive off.
It takes a few minutes before the Flat Tire
Monitor can detect a flat tire and issue an
alert.