Can you use 5mm spacers with stock lugs?
Can you use 5mm spacers with stock lugs?
I want to ad 5mm spacers on all four corners, do the stock lugs have enough threads??
Thanks
Mario
Thanks
Mario
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
I remembering doing research on this before and my conclusion is to be safe than sorry. So I got extended bolts from H&R.
The guideline with the SCCA is a bolt should have at least 7 turns. The stock bolts on stock wheels are about 9 turns. With a 1.25mm thread pitch, you only have about 2.5mm of spare threads.
Thread
Thread Starter
Forum
Replies
Last Post
Colt45Magnus
R56 :: Hatch Talk (2007+)
16
Aug 27, 2024 05:03 AM