For the rear fog light, it would seem that the bulb and wirings are there. So what would else I need other than a new switch to make it work? Anyone done it here yet? Please advise on the parts and procedures.

 

You will need to recode the car using NCS Expert. There are threads about in the electrical mod section. Very simple to do, or the dealer can do it for like an hour of labor.

Like you said you'll need the switch and new panel piece if you want the lighted icon. Way Motor Works sells both.

I have a 2013 MCS and all the wires are there too. I had to modify the wires a bit when I put the JCW aero kit on. I'll be doing the rear fog mod soon when I get around to buying the switch and panel.

 

So does what you said apply to the GP2 as well?

 

I would imagine so. All that stuff should be the same.

 

Is there anyone who actually has a GP2 and have done this to confirm the procedure?

 

Any GP2 owners who had done this and could share?

 

Way Motor Works has installed on their project GP. Here is a link to their build thread:

https://www.northamericanmotoring.co...gp2-build.html