When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What is the state of the crankshaft? I need it, but I need to make sure the journals are within the serviceable limits: > 45.75 mm for rod journals and >47.75 mm for main bearings. Would you be able to measure those by at least a caliper (micrometer is preferable)?
What is the state of the crankshaft? I need it, but I need to make sure the journals are within the serviceable limits: > 45.75 mm for rod journals and >47.75 mm for main bearings. Would you be able to measure those by at least a caliper (micrometer is preferable)?
Engine spins over smooth as can be and was full of oil when I got the car. Looked fantastic inside the head, so I'm not too worried about condition. I can check them with a caliper for you, but I do not have a micrometer, sorry. Where are you located? Shipping it is not going to be inexpensive on it.
Hey, for all the chrome window moldings, I need the clips that allow me to attach the moldings to the car.
I need the clips of the molding that meets from the windshield to the windshield wiper panel, both of the rear quarter-panel bottom side window clips, trunk hatch bottom window clips, side windshield pillar top covers (these things are like 4-4.5 inches long) and the screws that come with it. Some of the clips require a pair; meaning one set of clips attach to the molding itself and the other set attaches to the car and then they both meet connect when installing the moldings. I also need the whole passenger seat.
So for the clips, the small covers in the windshield pillars, and the passenger seat how much would that cost?
Thanks
Thomas
Hey, for all the chrome window moldings, I need the clips that allow me to attach the moldings to the car.
I need the clips of the molding that meets from the windshield to the windshield wiper panel, both of the rear quarter-panel bottom side window clips, trunk hatch bottom window clips, side windshield pillar top covers (these things are like 4-4.5 inches long) and the screws that come with it. Some of the clips require a pair; meaning one set of clips attach to the molding itself and the other set attaches to the car and then they both meet connect when installing the moldings. I also need the whole passenger seat.
So for the clips, the small covers in the windshield pillars, and the passenger seat how much would that cost?
Thanks
Thomas
Hey, Thomas. I'm pretty sure I need the clips for the windshield base trim clips for our other car. I have to dig in and see about the rest, and see if I can remove everything without damaging it. I'm not quite sure what you mean by the "side windshield top covers," can you post a pic? Not interested in shipping a seat, sorry.
Hey, Thomas. I'm pretty sure I need the clips for the windshield base trim clips for our other car. I have to dig in and see about the rest, and see if I can remove everything without damaging it. I'm not quite sure what you mean by the "side windshield top covers," can you post a pic? Not interested in shipping a seat, sorry.
Got the windshield corners off, no screws, but do you need the body side clips for them? For the quarter window base trim clips, do you need the body side, the trim side, or both?
Great. Thats okay if theres no screw I'll still take em. And I will need only the side that attaches to the CAR/BODY for both driver side clips and passenger side clips. No clips from the trim.
Thanks
Last edited by ttawfik3; Nov 7, 2021 at 09:21 AM.
Reason: Misread
Great. Thats okay if theres no screw I'll still take em. And I will need only the side that attaches to the CAR/BODY for both driver side clips and passenger side clips. No clips from the trim.
Thanks
Got all 14 clips off the body for the rear quarter panel trim below the windows. One of the clips has one of the two trim retainers broken, other 13 are 100% intact.
Thats fine. I dont think one clip will make the trim loose. Yes the clips and the corner trim gutter. Also can you tell me how you removed the corner trim gutter? Did you just pull it out or something? How did you remove it because I am lost as to how to install?
Also do you have the clips for the window trim on the bottom side of the trunk?
thanks
Thats fine. I dont think one clip will make the trim loose. Yes the clips and the corner trim gutter. Also can you tell me how you removed the corner trim gutter? Did you just pull it out or something? How did you remove it because I am lost as to how to install?
Also do you have the clips for the window trim on the bottom side of the trunk?
thanks
You first need to make sure all the old corner piece is out of the roof trim so there's room for the replacement to go. There's a clip that the oblong hole in the corner piece goes over. You need to carefully start the rear section of the corner piece into the trim. Then, when the large end of the oblong hole is over the clip, push it onto the clip and slide it the rest of the way into the trim. To remove you carefully slide it out until it can pulled away from the car. That's when the large end of oblong hole is over the clip in the car's body. Then you carefully slide it the rest of the way out of the trim.
I should have the clips for the hatch trim. It may be a few days or even next weekend until I have time to get them off.
Hey just messaging to see if you have the fuel tank breather line located below the intercooler? Also the intercooler Boots too. I wiill provide pictures of both just for clarification. Let me know, Thanks!
Hey just messaging to see if you have the fuel tank breather line located below the intercooler? Also the intercooler Boots too. I wiill provide pictures of both just for clarification. Let me know, Thanks!
Fuel Tank Breather Line:
Intercooler Boot:
I'll have to check on the condition of those parts. They should be there, but the breather line is my biggest question on condition.