Interior/Exterior Ram intake project
Former Vendor
Joined: Jul 2003
Posts: 1,594
Likes: 2
From: los angeles
Hi everyone...
The reason for this small delay, has been us trying to find the best way of
producing the CF scoop. The production up to last week was a wet layup, very
pretty but the amount of time to make the part was excessive and my composite guy told me in no uncertain terms, if he is to make these scoops it
has to be done with a vacuum bag system....period.
So we are getting more in early this week, and with that I hope most of the back orders will be met.
Some of you might have seen the new price of the CF scoop, this was necessary because of the new lay-up system and an accute shortage of CF
on the world market.
New price on CF HoodScoop $320.00
M7 will of course honor the previous price if you are on the back order list.
peter
Team m7
562-608-8123
The reason for this small delay, has been us trying to find the best way of
producing the CF scoop. The production up to last week was a wet layup, very
pretty but the amount of time to make the part was excessive and my composite guy told me in no uncertain terms, if he is to make these scoops it
has to be done with a vacuum bag system....period.
So we are getting more in early this week, and with that I hope most of the back orders will be met.
Some of you might have seen the new price of the CF scoop, this was necessary because of the new lay-up system and an accute shortage of CF
on the world market.
New price on CF HoodScoop $320.00
M7 will of course honor the previous price if you are on the back order list.
peter
Team m7
562-608-8123
Sent back
5th Gear
Joined: Aug 2004
Posts: 1,079
Likes: 1
From: AZ
Originally Posted by M7
Hi everyone...
The reason for this small delay, has been us trying to find the best way of
producing the CF scoop. The production up to last week was a wet layup, very
pretty but the amount of time to make the part was excessive and my composite guy told me in no uncertain terms, if he is to make these scoops it
has to be done with a vacuum bag system....period.
So we are getting more in early this week, and with that I hope most of the back orders will be met.
Some of you might have seen the new price of the CF scoop, this was necessary because of the new lay-up system and an accute shortage of CF
on the world market.
New price on CF HoodScoop $320.00
M7 will of course honor the previous price if you are on the back order list.
peter
Team m7
562-608-8123
The reason for this small delay, has been us trying to find the best way of
producing the CF scoop. The production up to last week was a wet layup, very
pretty but the amount of time to make the part was excessive and my composite guy told me in no uncertain terms, if he is to make these scoops it
has to be done with a vacuum bag system....period.
So we are getting more in early this week, and with that I hope most of the back orders will be met.
Some of you might have seen the new price of the CF scoop, this was necessary because of the new lay-up system and an accute shortage of CF
on the world market.
New price on CF HoodScoop $320.00
M7 will of course honor the previous price if you are on the back order list.
peter
Team m7
562-608-8123
Do they look the same with the new lay-up (deep glossy finish)?
My little dose of LITHIUM
iTrader: (1)
Joined: Jul 2005
Posts: 2,435
Likes: 2
From: Albuquerque New Mexico
Thanks Peter, and thanks Sid and Joel -- woohoo. It's here and it's on:
Install took about 20 minutes over a stock IC, using the stock diverter modified quite simply with a Dremel.
The fit is perfect, a few very minor blemishes on the CF (well within QC tolerance I'd say), and looks fantastic. Very custom, and it's gotta let more air in!
I will post installation notes on my web tomorrow.
phil
Install took about 20 minutes over a stock IC, using the stock diverter modified quite simply with a Dremel.
The fit is perfect, a few very minor blemishes on the CF (well within QC tolerance I'd say), and looks fantastic. Very custom, and it's gotta let more air in!
I will post installation notes on my web tomorrow.
phil
Former Vendor
Joined: Jul 2003
Posts: 1,594
Likes: 2
From: los angeles
Originally Posted by ///ACS330Ci
Thanks for the update Peter
Do they look the same with the new lay-up (deep glossy finish)?
Do they look the same with the new lay-up (deep glossy finish)?
There's no difference between the two, except the amount of post work
involved in finish work IE. no pinholes or airbubbles to fix.....
As for trade in an Extreme scoop.....Sorry no can do, but the marketplace
would be the easy way to sell it.
peter
5th Gear
Joined: Aug 2004
Posts: 1,079
Likes: 1
From: AZ
Originally Posted by M7
Hey....
There's no difference between the two, except the amount of post work
involved in finish work IE. no pinholes or airbubbles to fix.....
peter
There's no difference between the two, except the amount of post work
involved in finish work IE. no pinholes or airbubbles to fix.....
peter
Thread Starter
|
OVERDRIVE
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
Originally Posted by TheWrks
Looking good Sid, you forget to call me today about lunch 
I made in long enough for him to pass the part to me
Originally Posted by MSFITOY
Sorry buddy...Joel and I are both home sick I made in long enough for him to pass the part to me
I made in long enough for him to pass the part to me
Thread Starter
|
OVERDRIVE
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
I don't think Mini2 people have heard of this new widget...
http://www.mini2.com/forum/showthrea...74#post2270874
http://www.mini2.com/forum/showthrea...74#post2270874
Originally Posted by fdavid
Perhaps I can install mine tomorrow when I take a break during the day. How long it takes to replace? Should I wait until the weekend and take my time?
thanks for the info guys.
thanks for the info guys.
with the Upper diverter left off.....with the right tools the modification of the upper diverter 20 minutes tops
Former Vendor
Joined: Jul 2003
Posts: 1,594
Likes: 2
From: los angeles
Originally Posted by jimz68
Still waiting for my CF version. Hope I have it before AMVIV.
Jim
Hope I have it before AMVIV.Jim
We are shipping more CF on Friday and some went out yesterday
so who knows you will have it soon, and I will guarantee that you'l
have it before AMVIV.
peter
Team M7
562-608-8123
PS. If it makes you feel better, none of us at M7 has the scoop on our cars
CF or glass....
