JCW Garage / GP Talk Today 02:41 PM
Thank you for coming back on this, I am referring to the Red bar which runs across the rear to stop luggage from moving forward.
The link you provided shows the exploded diagram of the Red Bar and...
robj
Thread Starter
MINIs in General / Mini/MINI BUILDS Today 02:13 PM
Eddie07S
Within one’s own sphere of influence what one has done and is doing may look to be uninteresting as that is what is the norm, the usual. However, someone else looking into that sphere may see it...
Chamberlin1
Thread Starter
MINIs in General / the *NEW* Mini Marketplace Today 01:38 PM
Still looking! I can also use two minty Night Spoke wheels too, as an alternative to the R98s. I've got two brand new ones on the shelf.
shakham
Thread Starter
3rd Generation MINIs / F54 :: Clubman Talk (2015+) Today 01:30 PM
About the question "what else to fix while I'm there" chatgpt said:
1) clutch disk + pressure plate + throwout bearing - $300-$700
2) slave cylinder - $100-$250
3) rear main seal - $30-$80
4)...
turbo740
Thread Starter
MINI Countryman (2010 +) / 1st Gen Countryman (R60) Talk (2010-2015) Today 01:22 PM
Hi all,
Been a LONG time since I've posted here. We currently have a 2015 Countryman S All 4 manual, which we love. But it's got 98k miles and it definitely needs mechanical love to traverse...
3rd Generation MINIs / F55/F56 :: Hatch Talk (2014+) Today 12:41 PM
As long as the measured level is in between the MIN and MAX marks, no need to stress. Check it again in ~500 miles to see if any change.
I don't know how easy it would be to add this retrofit to...
bipedalnakedape
Thread Starter
3rd Generation MINIs / F55/F56 :: Hatch Talk (2014+) Today 12:32 PM
I was easily able to remove the Brake air ducts from the front using some trim removal tools. I didn't need to remove the bumper and it was really a 10 minute job to replace if you take your time.
...
bipedalnakedape
Thread Starter
MINIs in General / Tires, Wheels, & Brakes Today 12:28 PM
I wanted to come back and review some of my posts after having the car for a bit for others that come along. I now have the car 2 years.
The wop wop wop was actually the engine breaking. I used...
MINI Countryman (2010 +) / 1st Gen Countryman (R60) Talk (2010-2015) Today 11:59 AM
Have you resolved low oil pressure light? I have the exact problem you describe. I replaced the valve cover after noticing broken plastic on the opening of the valve cover where the PCV attaches. ...
FieldsofFire
Thread Starter
MINIs in General / the *NEW* Mini Marketplace Today 11:33 AM
njaremka
Seeing as how this is your first thread post here, I don't imagine you'll get much interest without actual pictures of your items. Just saying...