Best Scanner?
#1
#2
The Schwaben scan tool from ECS Tuning is fabulous. It's $200 but worth it.
https://www.ecstuning.com/b-schwaben...020sch01a~scf/
-Jeff
https://www.ecstuning.com/b-schwaben...020sch01a~scf/
-Jeff
The following users liked this post:
ECSTuning (10-11-2017)
#3
#4
The Schwaben scan tool from ECS Tuning is fabulous. It's $200 but worth it.
https://www.ecstuning.com/b-schwaben-by-foxwell-parts/professional-bmw-mini-scan-tool/014020sch01a~scf
-Jeff
https://www.ecstuning.com/b-schwaben-by-foxwell-parts/professional-bmw-mini-scan-tool/014020sch01a~scf
-Jeff
Thanks
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#5
#6
No problem, we found it to reset and reprogram early modules. But we have not tested it on the SZL. Some of the modules it could read but the reprogram function was not listed in the selectable functions. I know it can read most if not all modules and can test them if MINI programmed a test function. Like an on/off switch to see if a light bulb works.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172