The 2011 and newer MC and MCS models N16 and N18 have an oil pressure senser. I tried to get the ScanGauge Xgauge codes for oil pressure and was told that no oil pressure codes are available for the MC's. After scanning the network I found that the MC's use CANSF codes but the only CANSF codes I could find for oil pressure are as follows:

TXD: 07E02211470(01)
RXF: 046205140670
RXD: 3008
MTH: 002400190000
NAME: EOP

These codes are listed as experimental for GM CANSF. I read the Scangauge instructions for creating your own Xgauge codes but could not get much from them. The guidelines indicated that the 22 in the sixth and seventh place of the TXD code indicated these codes are specific for one user. In this case the these codes are specific for GM.

Since the ScanGauge is capable of reading oil pressure and the 2011 and newer MC's have oil pressure sensors, I think we should be able to come up with the correct codes. I have tried to get these codes from ScanGauge without success. If we can show there is enough interest, Scangauge might provide these codes. If anyone knows how to create these codes, I am sure that would be of interest to many of us. I provided the above codes as a possible starting point.

If you share my interest in obtaining the Scangauge codes for oil pressure or know how to create these codes, please respond. Reading the threads for gauges indicated there is a very strong interest in adding an oil pressure gauge to the MC's. I also noticed many people interested in getting a ScanGauge were turned off by its not having oil pressure.

2011 MC (Justa), PW, Sport Seats, ScanGauge II, Craven Speed ScanGauge Mount.

 

Planning to put my SGii on my new R60 when it arrives. Oil pressure would be useful!

 

Useful gauges in the MINI's has long been a headache for MINI owners. Just think of what happens to MINI Owners when they delete the dipstick!!??!

GIVE ME GAUGES!!!

I saw some Thread somewhere that talked about re-programming the TACH Digital Display to be able to read oil pressure and stupid me forgot to bookmark it!!

 

I am interested but I have had my SG for a total of 2 days so I know nothing about XGauges except how to enter them. I put in the code you listed in another thread and it doesn't work for me either.