NCS Expert for dealer-programmable options?
Has anyone else used this software successfully on an r50/52/53 to change the dealer-programmable options?
I have found most of them in the BC1 and KMB modules, but there are still a few that seem not to be documented - does anyone have other options to contribute? This is what I have so far: Central Locking -------------------------------------------- Automatic locking after starting off BC1 module - VERRIEGELN_AUT_AB_X_KM/H Automatic unlocking after engine offBC1 module - ENTRIEGELN_B_MOTOR_STOP Unlock all doors with remote (instead of driver's door first press, then all with second press)BC1 module - ZV_SELEKTIV and FERNBEDIENUNG_1/2/3/4 -- set ZV_SELEKTIV nicht_aktiv AND -- set FERNBEDIENUNG for each key (1-4) to einstiegshilfe Window Regulator/slide/tilt/sunroof -------------------------------------------- Convenient opening - open windows/sunroof/convertible with key in lock BC1 module - KOMFORTOEFFNUNG_SCHLOSS Closing windows/sunroof/convertible top from remoteBC1 module - KOMFORTSCHLIESSUNG_FB Lighting -------------------------------------------- Daytime Driving Light (dimmed high beams as DRL) BC1 module - GED_FL_ALS_DRL Follow-Me-Home (not active/40s/90s/150s/240s)BC1 module - HEIMLEUCHTEN Windscreen wipers -------------------------------------------- Stop wipers when car is stationary BC1 module - STANDRUECKSCHALTUNG Acoustic Warnings -------------------------------------------- Fuel Warning KMB module - AKUSTIK_TANK_RESERVE Displays/Language -------------------------------------------- Units Temperature (degrees f/degrees c) KMB module - TEMPERATUR_EINHEIT |
Hi alwzopn,
I am very very interested in do it in my Mini R53 06, but I canīt find in the forum a lot of information to do this in the R53 Minis. What cable are using it ? what software ? and did you find the instructions for the R53 ? Please tell me, really I am very interested in this, the first thing that I need is to up the windows and close the sunroof with the control key. Thank you in advance!! |
I don't think there's a setting in the 1st gen for auto-up windows.
|
|
Okay, I looked back through the BC1 trace file and googled a few options. It looks like
KOMFORTSCHLIESSUNG_FB set to AKTIV should do it. NCS Dummy translates this as "COMFORT CLOSING WITH REMOTE (POWER WINDOWS, SUNROOF OR CONVERTIBLE TOP)". |
Dear alwzopn,
As I told I am very very interested in do this, could you help me ??, please!! First I will buy my cable, do u have the link to buy exactly the one that you bought ?? Then I will download the software that is here in the 2nd Gen forum, is that one that u use ?? I never did something similar to any of my cars, do I have to be a programmer or an expert in things like this ?? Finally which instructions do u already install ? Thank you so much, I hope u can answer my question to buy my cable immediately. =) |
Originally Posted by mariocaz
(Post 3376906)
First I will buy my cable, do u have the link to buy exactly the one that you bought ??
Originally Posted by mariocaz
(Post 3376906)
Then I will download the software that is here in the 2nd Gen forum, is that one that u use ??
Originally Posted by mariocaz
(Post 3376906)
I never did something similar to any of my cars, do I have to be a programmer or an expert in things like this ??
Originally Posted by mariocaz
(Post 3376906)
Finally which instructions do u already install ?
|
Originally Posted by alwzopn
(Post 3376926)
I have this cable, though from a different vendor - http://cgi.ebay.com/ebaymotors/220869774556
Originally Posted by alwzopn
(Post 3376926)
I would suggest being very careful and following all the directions very closely. It is possible to mis-code the modules and break something. If you aren't comfortable with this, you may not want to go ahead with this.
Is it risky ?? the software is difficult ? so you tell me if I do something wrong I could break the Miniīs computer ??? :cry: The last question was..... what instructions did you install to your Mini with this software ?? I donīt know what to do!!!!! :confused: I love my car and will be fantastic install/program a few instructions that I want/need, like the one to up the windows with the remote control. :) |
|
Originally Posted by mariocaz
(Post 3376933)
Ok, now I have fear hehehe, I know very well the computer things, but as I told you I never do/did something like this.
Is it risky ?? the software is difficult ? so you tell me if I do something wrong I could break the Miniīs computer ??? :cry: I donīt know what to do!!!!! :confused:
Originally Posted by mariocaz
(Post 3376933)
The last question was..... what instructions did you install to your Mini with this software ??
Originally Posted by mariocaz
(Post 3376940)
|
BUMP - Added a few new options and their settings to the OP.
|
Is this also possible with an R53? If so, what software is necessary to drive the cable?
|
NCS Expert is the software.
I don't understand your question about the R53 - possible as opposed to what? This is the 1st Gen forum, isn't it? :) |
Ugh, yah.:lol:
|
My Father in law with a 2006 R53 is interested in having his lights come on when the windshield wipers come on. Does anyone know if this is possible?
|
I've never seen any options for this, I don't think it's even possible considering the headlights are on a physical switch. Maybe if the auto headlights were linked to the wipers and/or rain sensor. But like I said, this doesn't sound like an option I've ever seen.
|
There is a daytime running light option if you use the SSS software. I didn't notice any for on with wipers. A good partner for NCS is NCSdummy.
http://forums.bimmerforums.com/forum....php?t=1553779 http://forums.bimmerforums.com/forum....php?t=1483234 They have done a lot of work. |
Just did the daytime running light code and the convienient closing using the key fob. I have purchased the rear fog light and the switch. Does anyone know if this can be turned on using ncs? It's a dealer programmable option.
|
Originally Posted by alwzopn
(Post 3376687)
I don't think there's a setting in the 1st gen for auto-up windows.
http://www.rogueeuro.com/forum/viewtopic.php?f=7&t=387 |
Originally Posted by youngw682eni
(Post 3461337)
Just did the daytime running light code and the convienient closing using the key fob. I have purchased the rear fog light and the switch. Does anyone know if this can be turned on using ncs? It's a dealer programmable option.
Code:
REAR_FOG_ENABLE |
Quick question for the OP. We use the R56 datens for the R53, correct? Thanks!
|
Originally Posted by seamill
(Post 3486914)
Quick question for the OP. We use the R56 datens for the R53, correct? Thanks!
Hope this helps. |
interesting what and where can i get a cable/program i need for a 2008 MCs cabrio
how would i be able to setup so both my doors unlock together and windows up and top up by remote |
Originally Posted by youngw682eni
(Post 3461337)
Just did the daytime running light code and the convienient closing using the key fob. I have purchased the rear fog light and the switch. Does anyone know if this can be turned on using ncs? It's a dealer programmable option.
|
Digital Speedometer
KMB module - BC_GESCHW_ANZEIGE_DIGITAL SET TO AKTIV Alarm Activation (Flashing) BC1 module - DWA SET TO AKTIV Auto-Locking Of Vehicle 2 mins after Unlock (Without Opening Any Doors) BC1 module - VERRIEGELN_AUT_NACH_2_MIN SET TO AKTIV |
All times are GMT -7. The time now is 06:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands