Electrical For discussions regarding wiring up electrical modifications such as radar detectors, brake light mods, power sockets, and driving lights in Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

Electrical How to program a transponder key (valet key?) on '05 MC?

Thread Tools
 
Search this Thread
 
  #1  
Old 08-13-2010, 06:25 AM
peanut_man's Avatar
peanut_man
peanut_man is offline
2nd Gear
Thread Starter
Join Date: Mar 2008
Posts: 95
Likes: 0
Received 0 Likes on 0 Posts
How to program a transponder key (valet key?) on '05 MC?

Hi there,

I'm wondering if I get the blank transponder key (no remote) from ebay and have the locksmith cut it, how do I program the car to recognize the key? I know this thread has one for the regular remote key but not sure if there's a different instruction for non-remote / valet key:

https://www.northamericanmotoring.co...n-r53-how.html

Thanks!


http://cgi.ebay.com/ebaymotors/04-05...ht_2940wt_1110
 
  #2  
Old 08-13-2010, 11:36 AM
rkw's Avatar
rkw
rkw is offline
OVERDRIVE
Join Date: May 2005
Location: San Francisco
Posts: 8,233
Received 120 Likes on 105 Posts
That procedure only programs the remote lock/unlock function. Programming the immobilizer chip for the ignition may require a dealer. The seller claims to include full instructions and you could contact them with questions. I think you'll save over the cost of a new non-remote key from the dealer although you'll still have the expense for cutting the key and programming.
 
  #3  
Old 08-16-2010, 03:11 AM
peanut_man's Avatar
peanut_man
peanut_man is offline
2nd Gear
Thread Starter
Join Date: Mar 2008
Posts: 95
Likes: 0
Received 0 Likes on 0 Posts
Will this program the immobilizer chip?

https://www.northamericanmotoring.co...for-cheap.html

Step 1 in there:

1. Buy yourself a cheap used FOB key off of eBay (see Figure 1). I won my key for about $10 after shipping. Of course, the key won't be cut to your car, but you can program the FOB quite easily to your car. To program the key, put your existing key in the ignition and turn it to the AC on position while holding your new eBay key close to the existing key. Remove your existing key from the ignition, then hold the eBay key close to the rear view mirror. Hold down the eBay key's unlock button while pressing the lock button three times, then release both buttons.
 
  #4  
Old 08-17-2010, 11:32 AM
rkw's Avatar
rkw
rkw is offline
OVERDRIVE
Join Date: May 2005
Location: San Francisco
Posts: 8,233
Received 120 Likes on 105 Posts
Originally Posted by peanut_man
Will this program the immobilizer chip?

https://www.northamericanmotoring.co...for-cheap.html
The topic of that thread is how to cheaply convert a non-remote key into a remote key. The OP purchased a new, working non-remote key from the dealer (cut and immobilizer chip programmed), and converted it into remote key using the innards of a used eBay key. He did the remote programming using the procedure but he started with an immobilizer chip already programmed for his car by the dealer.
 
  #5  
Old 09-09-2010, 03:42 PM
Josue.Rodz's Avatar
Josue.Rodz
Josue.Rodz is offline
1st Gear
Join Date: Sep 2010
Location: Aguada, PR
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
ifibuy the key uncut on eba the dealer will cut and program that key even if i didn't bought it from them? $368 seem way too much for a key...
 
  #6  
Old 09-09-2010, 05:48 PM
rkw's Avatar
rkw
rkw is offline
OVERDRIVE
Join Date: May 2005
Location: San Francisco
Posts: 8,233
Received 120 Likes on 105 Posts
It will be your dealer's decision whether they are willing to cut and program an aftermarket key. You need to ask them.

Is $368 for a remote key? The eBay key referenced earlier is non-remote. According to RealOEM.com, the USA prices for new uncut, unprogrammed keys from a dealer are about $60 non-remote, $150 remote.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bahman
MINIs & Minis for Sale
13
02-14-2016 10:29 AM
newminijcw
MINIs & Minis for Sale
9
10-21-2015 02:37 PM
tcjake
MINIs & Minis for Sale
0
09-30-2015 08:14 AM
jennster
Stock Problems/Issues
3
09-28-2015 06:19 PM
genik
Cooper (non S)
5
09-25-2015 02:46 PM



Quick Reply: Electrical How to program a transponder key (valet key?) on '05 MC?



All times are GMT -7. The time now is 03:26 PM.