Originally Posted by 70spop
(Post 1583450)
Just that it'll get ugly-dirty and parts of it will burn off after a few months. At least, that's how it always seemed on the high school hot rods. :lol:
I think if the stuff is applied according to the directions (which involves multiple coatings and heating up/cooling down in between), it lasts longer and basically acts as a rust preventative. Just kidding about the white - white was popular for headers in the '70s, but there'd be no practical reason to do that on the MINI. |
VHT Strip Fast is the best stuff on the market today.
|
Originally Posted by Putz
(Post 1583489)
VHT Strip Fast is the best stuff on the market today.
Thanks! I'll give it a try...:) |
Originally Posted by MSFITOY
(Post 1583567)
Didn't know they make their own strip...this thread is a Gold Mind of information...:lol:
Thanks! I'll give it a try...:) :lol: Then you wont mind if I hijack it for a moment. :lol: Wanted to show my new toy Now I know its not as pretty as yours and I know it wont work as good as yours but its better than stock. https://www.northamericanmotoring.co...m/DSCN1730.JPG |
Originally Posted by MSFITOY
(Post 1583026)
Somebody's gotta double check your work...:razz::lol:
Ok...I'm Theta Testing...:lol: But I have this coming this week from Jan:thumbsup: Longboard http://www.revolutionmini.com/images...fx600small.jpg |
What's a V-band?
ooooo...Kevlar clutch...I have one of those, Spec 2...no where as purty as this one though...:no:
Originally Posted by Longboard Mini
(Post 1583652)
Your is better then mine. I don't have the V-band:cry:
But I have this coming this week from Jan:thumbsup: Longboard http://www.revolutionmini.com/images...fx600small.jpg |
Originally Posted by MSFITOY
(Post 1582795)
Wow...I didn't think you come here anymore...:lol:
-C |
Originally Posted by jeffc
(Post 1582879)
I took a picture of his car at the dragon. Nice looking car.
http://minicooper.tshared.com/07dragon/dragon20077.jpg That's "me". Probably after my LDG tune. Too bad I didn't meet you. Next time! -C |
Originally Posted by Longboard Mini
(Post 1583652)
Your is better then mine. I don't have the V-band:cry:
But I have this coming this week from Jan:thumbsup: Longboard http://www.revolutionmini.com/images...fx600small.jpg |
Originally Posted by CXRK
(Post 1583915)
Well, I often lurk but not speak up. Depends on how much time I have.....Something in which you have WAY more of! :razz:
-C |
Originally Posted by MSFITOY
(Post 1584433)
You should find a wife to free up your time...:wink: :lol:
hey waitaminute... WIVES DON'T FREE UP YOUR TIME!!! :confused: It's a trap... RUN!!! |
Originally Posted by minimusprime
(Post 1584480)
yeah what he said...
hey waitaminute... WIVES DON'T FREE UP YOUR TIME!!! :confused: It's a trap... RUN!!! |
Originally Posted by MSFITOY
(Post 1584541)
Ok...you'd need to clone my wife...:lol:
|
Originally Posted by minimusprime
(Post 1584583)
I graciously accept your offer to clone your wife for me. I eagerly await my new bride. :lol:
|
She'd be a clone. Not like a real girl or nuthin'
|
Originally Posted by Mini Fireman
(Post 1584617)
Hmmmm...hows does olyerin feel about this? :lol:
|
Originally Posted by minimusprime
(Post 1584718)
hadn't thought that far ahead yet... I figured it would just work it'self out. :impatient
|
Originally Posted by Putz
(Post 1583583)
:lol: Then you wont mind if I hijack it for a moment. :lol:
Wanted to show my new toy Now I know its not as pretty as yours and I know it wont work as good as yours but its better than stock. https://www.northamericanmotoring.co...m/DSCN1730.JPG |
Originally Posted by herbie hind
(Post 1584833)
yes ., yes it is ... i love my alta stuff .:thumbsup::thumbsup: 180 at the wheels with a bad lung ain't bad for a header .
Are you running the header with the CAT? Are you throwing any codes? |
yup with the alta cat and full exhaust .no codes . with the lung fixed and the webb head ,i may see 200 or more .
|
Ok...I'm bored waiting for the header to come back from the shop with the extra bung so I can install it...as soon as Mr UPS shows up with the flex pipe and Magnaflow resonator, I'll have it and the connecting flange welded ...then I'll need to run Msfitoy over to my header guy which is roughtly 15 mile away with just the header on...hope I don't get pulled over as it's going to be LOUDA$$!!!...:eek::no:
In the meantime, as to not bore you guys too, I installed new "angle eyes" marker lamps and got my new legit Michigan plate...enjoy... http://shutter01.pictures.aol.com/da...rIhCC00300.jpg http://shutter10.pictures.aol.com/da...KCoOmF0300.jpg http://shutter04.pictures.aol.com/da...oNUWFr0300.jpg |
Originally Posted by MSFITOY
(Post 1590255)
In the meantime, as to not bore you guys too, I installed new "angle eyes" marker lamps and got my new legit Michigan plate...enjoy... Ohh that was you 6,666th post....and I got to reply...more of that 666 mojo for me. |
Originally Posted by MSFITOY
(Post 1590255)
Ok...I'm bored waiting for the header to come back from the shop with the extra bung so I can install it...as soon as Mr UPS shows up with the flex pipe and Magnaflow resonator, I'll have it and the connecting flange welded ...then I'll need to run Msfitoy over to my header guy which is roughtly 15 mile away with just the header on...hope I don't get pulled over as it's going to be LOUDA$$!!!...:eek::no:
In the meantime, as to not bore you guys too, I installed new "angle eyes" marker lamps and got my new legit Michigan plate...enjoy... http://shutter01.pictures.aol.com/da...rIhCC00300.jpg http://shutter10.pictures.aol.com/da...KCoOmF0300.jpg http://shutter04.pictures.aol.com/da...oNUWFr0300.jpg :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: . Longboard |
Looking good Sid
|
Originally Posted by Longboard Mini
(Post 1590326)
Stop showing that ugly car. My eyes are are bleeding from its ugly site.
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: . Longboard |
All times are GMT -7. The time now is 01:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands