Minis fuel cap flag

Reply Subscribe

Thread Tools

Search this Thread

Aug 1, 2006 | 03:12 PM

iamhata

Thread Starter

1st Gear

Joined: Oct 2004

Posts: 26

Likes: 0

Minis fuel cap flag

http://cgi.ebay.ca/Austin-Rover-Mini...592QQihZ002QQc

Aug 2, 2006 | 02:47 PM

Minimad

6th Gear

Joined: Dec 2002

Posts: 1,539

Likes: 0

Those come in various designs including Union Jack...to protect from gas sloshing out of ill fitting caps and those who are clumsy with the filler hose.

Aug 2, 2006 | 08:02 PM

ParrishBlue

4th Gear

Joined: Aug 2005

Posts: 466

Likes: 0

Looks like a babies bib

Not very pretty

Aug 3, 2006 | 06:18 PM

bluedawg

1st Gear

Joined: Jul 2006

Posts: 12

Likes: 0

That is one of the top 10 dumbest things I've seen for any car!

Aug 3, 2006 | 10:34 PM

RonP

4th Gear

Joined: May 2006

Posts: 470

Likes: 0

Going to have to agree with bluedawg on that one.

Aug 4, 2006 | 12:39 PM

ParrishBlue

4th Gear

Joined: Aug 2005

Posts: 466

Likes: 0

If your'e old enough to drive, you should know how NOT to slop gasoline all over you car. If you do you need to be re-trained

I agree, it's ugly too

Aug 5, 2006 | 07:00 AM

asodestrom

6th Gear

Joined: Feb 2003

Posts: 2,806

Likes: 0

From: Santa Rosa, CA

How come ist says it's yellow on one side and black on the other but the picture on the car is red

Do they make them for oil, coolant, brake fluid etc.

Trending Topics

No Crank/Start Diagnosis

31

279
Hot or Not (Fuses)

108

154.8k
Retrofit TJA to F54 Clubman

8

216
Mini Relay Clicking

48

49.6k
R56 Android Headunit Installed

73

19.6k

Aug 5, 2006 | 11:43 AM

spinndrift

Neutral

Joined: Jul 2006

Posts: 5

Likes: 0

From: U.K.

Quote:

Originally Posted by ParrishBlue

Looks like a babies bib

Not very pretty

Totally agree with the badies bib statement.

Andy

Aug 5, 2006 | 04:55 PM

erickvonzipper

6th Gear

Joined: Mar 2005

Posts: 2,384

Likes: 0

From: LI, NY

Leaving it there all the time may be tacky but sliding it on for a fill-up and then taking it off wouldn't be a bad thing. Then again, that might take longer than waiting for the nozzle to stop dripping. . . =o|