Engine Steady Brackets
#1
Engine Steady Brackets
[FONT=Verdana]I have a 1998 mini rove that ever two month it damages the [/FONT]POLY STABILIZER BUSH on the top stabilizer bar. I will like to know
which one is the best one to use. If adding the stabilizer bar that goes to the water pump bolts or the one that goes to the thermostat housing and can anyone put pic if they have done it...
which one is the best one to use. If adding the stabilizer bar that goes to the water pump bolts or the one that goes to the thermostat housing and can anyone put pic if they have done it...
#3
is this question a plant?
More than once I've wondered if questions here were planted by publishers . . .
In the mailbiox today is the newest MiniWorld and the feature DIY:
"Engine steady upgrade guide"
http://www.miniworld.co.uk/
In the mailbiox today is the newest MiniWorld and the feature DIY:
"Engine steady upgrade guide"
http://www.miniworld.co.uk/
#5
as said b4, there are a lot of different engine steadies out there. Looking at 7's page there's nearly a dozen.
Maybe if you could be a little more specific, or even have a picture, someone will recognize what's in their car.
And as I mentioned the July 11 MiniWorld has a tech article about installing a top, and lower steadies. What they did involved cutting off existing mounts, installing reinforcing backing plates and bolt in mounts . . .
Maybe if you could be a little more specific, or even have a picture, someone will recognize what's in their car.
And as I mentioned the July 11 MiniWorld has a tech article about installing a top, and lower steadies. What they did involved cutting off existing mounts, installing reinforcing backing plates and bolt in mounts . . .
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
07-16-2020 12:54 PM
ECSTuning
Interior/Exterior Products
0
08-21-2015 12:58 PM
ECSTuning
Vendor Announcements
0
08-19-2015 12:51 PM