Will these fit?
#1
Will these fit?
I'm looking at buying this HID retrofit for my classic. I'm wondering if it will fit in my classic without a front flip. Will I have to modify a bunch of stuff to get it to work? The retrofit is complete and ready to be wired in, but I'm holding off on buying it until I know that it will fit into my stock mini without canibalizing the current headlight parts.
The guy I am buying from has a front flip on his vtec mini. I'm basically wondering am I gonna have to go in and cut a bunch of stuff to get it to work? Is there a cup behind the current mini headlight that will have to be removed/cut out? Anything you guys know would help.
In the next two photos, it's the smaller black one.
The guy I am buying from has a front flip on his vtec mini. I'm basically wondering am I gonna have to go in and cut a bunch of stuff to get it to work? Is there a cup behind the current mini headlight that will have to be removed/cut out? Anything you guys know would help.
In the next two photos, it's the smaller black one.
#2
4th Gear
iTrader: (1)
Join Date: Oct 2006
Location: Belle Vernon, PA
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
The headlight cup just unscrews and you can get a replacement one if you wanted. I'm not sure what will hold the new lights to the fender so you may need to cut the cup and just use the part that holds the sealed beam in. You also may have a air duct inside of the fender that may get in the way???
http://www.7ent.com/detail.cfm?pageid=2496
http://www.7ent.com/detail.cfm?pageid=2496
Thread
Thread Starter
Forum
Replies
Last Post
trw92a
R50/R53 :: Hatch Talk (2002-2006)
8
08-26-2015 01:47 PM
ECSTuning
Vendor Announcements
0
08-19-2015 12:51 PM
ECSTuning
Vendor Announcements
0
08-12-2015 01:24 PM