2008 Mini Cooper Hatchback
Thread Starter
|
Neutral
Joined: Dec 2022
Posts: 1
Likes: 0
From: San Diego
2008 Mini Cooper Hatchback
Hi all, been having transmission issues and have replaced all of the transmission solonoids and the valve body but when the car shifts from 3rd to 4th gear I get no output. Using the diagnostic tool, the amperage on SLC1 is 100mA. Most of the other solonoids are around 900-1000 mA. I'm thinking I may have a bad internal wiring harness but any help on this is greatly appreciated. Thank you!
1st Gear
Joined: Jul 2022
Posts: 16
Likes: 2
hahaaha watching this from england in 2018, this is my first car and this made me laugh so much! love your humour haha 
192.168.100.1 192.168.1.1
192.168.100.1 192.168.1.1
Last edited by landed; Jan 10, 2023 at 10:42 PM.
Hello Scrappy,
Do you have an R56 Cooper S? The auto has two main wires connected to the solenoids.
https://www.realoem.com/bmw/enUS/sho...diagId=24_1066
They share the wire from the older R53 platform automatic:
https://www.northamericanmotoring.co...-problems.html
Do you have an R56 Cooper S? The auto has two main wires connected to the solenoids.
https://www.realoem.com/bmw/enUS/sho...diagId=24_1066
They share the wire from the older R53 platform automatic:
https://www.northamericanmotoring.co...-problems.html
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post