MC on the boat...
#1
MC on the boat...
Well, my astro blk/white MC is on the boat!
During the wait, I've been researching and shopping and everyone's knowledge here on NAM has been a great help in helping me choose my mods.
It's good to know that there are other people who are as into their MINIs as I am... Thank you!
So here's list of some mods that I'd like to get your feedback on-
K&N typhoon short ram intake (red)
Helix short shifter
Magnacor 8.5mm spark plug wires (red)
MOMO race airleather/alloy shift ****
MOMO stealth wide black pedals w/ footrest
H sport springs (1" drop f&r)
R speed 22mm forged rear sway bar (set on soft)
Borla stainless catback exhaust
Power Slot slotted rotors f&r
Helix stainless brake lines
EBC greenstuff brake pads
Then here are my wheel choices-
HP Racing Evo 18x7.5 darksilver 8 hole
http://www.wheelsnext.com/product.ph...&inum=&large=1
or
Volk Racing Gram Light 57S 17x7.5 silver
http://www.forperformance.com/rays/w...lights57s.html
or
PIAA FR-7 17x7.5 gun metallic (a bit pricey, though)
http://www.rspeed.net/mini/item.asp?...6&prod=405-210
Then after all that, if I still have any money left-
Schrick performance camshaft
Lightened aluminum flywheel
Hi-flow throttle body (58mm)
ECU remap- Jet ECU, or GIAC chip, or Evotech, not sure which to do
MCS fuel tank conversion w/ cap
Alta 4 light bar (but I might need a new bumper cover to accomodate them being mounted low, either S or Aero)
MOMO street racer GT seats, blk/gray
So, that's it! I'm in Denver so I'll probably have Webb Motorsports do all the installing (as I have limited experience under the bonnet)
Thanks for the input! Motor on!
During the wait, I've been researching and shopping and everyone's knowledge here on NAM has been a great help in helping me choose my mods.
It's good to know that there are other people who are as into their MINIs as I am... Thank you!
So here's list of some mods that I'd like to get your feedback on-
K&N typhoon short ram intake (red)
Helix short shifter
Magnacor 8.5mm spark plug wires (red)
MOMO race airleather/alloy shift ****
MOMO stealth wide black pedals w/ footrest
H sport springs (1" drop f&r)
R speed 22mm forged rear sway bar (set on soft)
Borla stainless catback exhaust
Power Slot slotted rotors f&r
Helix stainless brake lines
EBC greenstuff brake pads
Then here are my wheel choices-
HP Racing Evo 18x7.5 darksilver 8 hole
http://www.wheelsnext.com/product.ph...&inum=&large=1
or
Volk Racing Gram Light 57S 17x7.5 silver
http://www.forperformance.com/rays/w...lights57s.html
or
PIAA FR-7 17x7.5 gun metallic (a bit pricey, though)
http://www.rspeed.net/mini/item.asp?...6&prod=405-210
Then after all that, if I still have any money left-
Schrick performance camshaft
Lightened aluminum flywheel
Hi-flow throttle body (58mm)
ECU remap- Jet ECU, or GIAC chip, or Evotech, not sure which to do
MCS fuel tank conversion w/ cap
Alta 4 light bar (but I might need a new bumper cover to accomodate them being mounted low, either S or Aero)
MOMO street racer GT seats, blk/gray
So, that's it! I'm in Denver so I'll probably have Webb Motorsports do all the installing (as I have limited experience under the bonnet)
Thanks for the input! Motor on!
Last edited by sandtoast500; 12-18-2004 at 11:08 AM. Reason: smilies
#2
Welcome to NAM. :smile:
Living in Denver you have it pretty well MINI wise. Randy is there, so you have the aftermarket covered (talk to him about your mods if you haven't already).
Also I would join mini5280. They also have a mini5280 forum on NAM so you can check up on current news.
Again, welcome.
Dave
Living in Denver you have it pretty well MINI wise. Randy is there, so you have the aftermarket covered (talk to him about your mods if you haven't already).
Also I would join mini5280. They also have a mini5280 forum on NAM so you can check up on current news.
Again, welcome.
Dave
Thread
Thread Starter
Forum
Replies
Last Post