Hey folks!

Though I'm fairly mechanically inclined and have
several mechanics whom I deal with when I feel a job
is "over my head" or when I'm just too lazy to do the job
myself. Blah, blah ,blah...
-I'd feel much more confortable having my Mini's
pulley swapped by someone who has done one before.
Does anyone have a suggestion for an installer in
Central Florida? I don't want to drive to Renntech.
I've dealt with them in the past (had a Renntech CLK)
and they were great. But it's a six hour round trip
from Daytona!

Any suggestions would be greatly appreciated,
- Jim

You should have drove down to Renntech when Randy was there. I and a few other from the Tampa area went down, and that's a longer drive than from O-town. Come-on, motor man... motor.

I would have if I'd had my Mini then. --I've only had her for a week.


>>You should have drove down to Renntech when Randy was there. I and a few other from the Tampa area went down, and that's a longer drive than from O-town. Come-on, motor man... motor.

Bubba,

GREETINGS :smile: !!! Welcome to MCO and the Florida MINI Family.
Congratulations on your recent purchase ! You will definitly improve the driveability and performance of your MCS with the pulley conversion :grin: !!
My MCS drives like a different car - and all for the better. Pulling from a dead stop is much easier, and power at the top end is amazing :eek: :eek: !! You will be glad you did !!!!!!!

Hope to meet you at one of our events !!

Best Regards,
Ron