NCS Expert Mods Lab
Hi, there
I'm researching for two (2) mod through NCS Expert for my red baby: 1) I know there is a way to change the "low fuel" warning. Factory coding says: there is 10 orange LEDs (1/10 tank). If there is less than 3 LEDs on (3/10 tank), then, all LEDs must be red (2/10 tank, 1/10 tank then empty). I want to modify this by changing the variable to change the "color". I want red LEDs only when there is less than 2 LEDs on instead of 3 LEDs (2/10 tank instead of 3/10 tank). It seems this is related with the KOMBI module as in BMW is. Any experiencie with it? :confused: 2) My red baby only use Castrol Edge 5w30 (better viscosity on the summer) and Motul X-cess 5w40 (better viscosity on the winter). Both oils must be changed every 15,000 miles, but my oil change warning is configured to trigger the alert every 30,000 miles. I can just reset the value through the tach, but I can't change the value of the miles between warnings. It seems there is a work to do it with my best friend NCS Expert. Any experiencie with it? :sly: |
For the point 1, I could find some "tank" variables:
TANK_RED_REICHWEITE wert_01 TANK_OHM_FEHLER_UG wert_01 TANK_OHM_FEHLER_OG wert_01 TANK_MITTLUNGSZEIT wert_01 TANK_OHM_FEHLER_OG wert_01 TANK_MITTLUNGSZEIT wert_01 TANK_SICHERHEITSFAKTOR wert_01 TANK_BERUHIGUNGSZEIT wert_01 TANK_SCHWELLE_RESERVE wert_01 TANK_RW_WARNUNG wert_01 TANK_SCHWELLE_AUF/AB wert_02 TANK wert_01 TANK_VOLL_ERKENNUNG wert_01 TANK_FILTER_STEIGEND wert_01 TANK_FILTER_FALLEND wert_01 It seems here should be the trick: TANK_SCHWELLE_RESERVE wert_01 TANK_RW_WARNUNG wert_01 :sly: |
Anyone with any of this variables changed (KOMBI module)?:
TANK_SCHWELLE_RESERVE wert_01 TANK_RW_WARNUNG wert_01 :confused: |
I believe that the oil service interval is in the 4BMOT module (DME module).
It is also part of the vehicle order so you should be able to change it there. There is a list of all possible vehicle order codes in the NCS Expert install files. |
Originally Posted by cerenkov
(Post 4081473)
I believe that the oil service interval is in the 4BMOT module (DME module).
It is also part of the vehicle order so you should be able to change it there. There is a list of all possible vehicle order codes in the NCS Expert install files. I have experience on changing VO (adding xenons, MFSW, Sport Button and others). Thank you again, I will be searching for the correct VO :thumbsup: |
Originally Posted by miniuy
(Post 4085181)
Great info! Thank you so much!
I have experience on changing VO (adding xenons, MFSW, Sport Button and others). Thank you again, I will be searching for the correct VO :thumbsup: |
Originally Posted by cerenkov
(Post 4085205)
The codes are in the file R56AT.000 is located in the DATENS folder. Open it with a text editing program like notepad.
I will let you know |
OT But... I'd recommend you change your oil more than every 15,000 miles. Somewhere between 5000-7500 is advisable.
|
Originally Posted by Wynnston
(Post 4087380)
OT But... I'd recommend you change your oil more than every 15,000 miles. Somewhere between 5000-7500 is advisable.
|
All times are GMT -7. The time now is 05:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands