Repair a wheel?
:mad: :mad: I dumped my month old car into a storm sewer grate and it slid into a curb. Now the edge of the wheel is a little chewed up. I doubt that thing can be done about it. It is the wheel that comes with the MCSc sport package. Any ideas anyone. Other than a new one of course. Anyone know how much a new one costs?
|
There are services that can refinish your wheel. If the damage is not too bad, they will come to you and do it right on the car, without even taking it off. Worse damage may require pulling off the tire, but it will still likely be cheaper than buying a new wheel.
|
Yes, as mtbscott says, there are wheel repair services available. Easiest place to start other than the Yellow Pages is to call your dealer - they probably already have someone that they use for their in-house needs and could recommend them to you. Sorry to hear of your misfortune. Best of luck! :thumbsup:
|
I'd just pick up a wheel from ebay
|
My YP doesn't have anything. I'll give the dealer a call. They are three hours away but that is better than buying a new wheel I think.
Thanks. |
Originally Posted by VoiD
I'd just pick up a wheel from ebay
|
I saw an excellent thread on repairing a chewed up wheel SOMEWHERE on this forum. Had pics and step by step instructions. Do a search.
Edit: I found this link within a thread: http://www.bmwtips.com/tipsntricks/w...uff-repair.htm |
WOW!!!! Thanks guys!!!! I'll look at the wheel closely and see if I think I can sand it all down. If not Ebay will be my next step.
|
EBAY IS THE GREATEST THING OUT THERE. :thumbsup: :thumbsup: :thumbsup: I just got a gps for about $400 less than in the stores and im bidding on the rims i want. GOD I LOVE EBAY
|
My girlfriend ran over what she thinks was a piece of wood on the highway (@65 mph) and bent one of our brand new wheels pretty good. I thought we might need to replace it, but a local machine shop was able to repair it within a day. At the shop they had examples of wheels before/after repair, they had several with serious curb rash before, and looking brand new after.
I'd have to check my receipt to be certain, but I think I paid about $120 (canadian) to get it repaired. No problems with the repaired wheel at all. B |
Talk about rimming a wheel, i took a turn a tad too sharp and nailed
my rear wheel (SSR GT3) over the weekend. it took a nice pea sized chunk of alloy away from the lip along with 3 more smaller chunks and 2 scuff marks. :lol: all I could do was shake my head and laugh it off. It was a tap, but not a Bang. The lip wasn't bent and the damage was not quite enough to take it to a wheel repair shop before my S03's were worn out (at about a nice 55% left right now). I would have to remove the tire before taking it in. So I basically did what the DIY link above says without the paint... instead, inorder to achieve the similar polished aluminum finish, I took some thin alumium tape and polished it to a nice shine using Wenol. Then I cut a few pieces of the alumium to about a 20x8mm size and applied it over the putty. The adhesive is so strong once you put it on and keep it on over night it won't peel off or anything. Unless you look very closely looking for the repair, I don't think one would be able to find it. When the tires are ready to be replaced i will decide again if I want to get it repaired professionally or just use it as is. http://www.geocities.com/ken350gt/GT3.repaired1.jpg |
I just used this process to repair a curb grind that went about 1/3 around the edge of a white S-lite. I came out very nice with only one problem. The white wheel paint from Wirth does not quite match the S-lite white. The Wirth paint is a little 'white'er'.
Originally Posted by tahoe
I saw an excellent thread on repairing a chewed up wheel SOMEWHERE on this forum. Had pics and step by step instructions. Do a search.
Edit: I found this link within a thread: http://www.bmwtips.com/tipsntricks/w...uff-repair.htm |
All times are GMT -7. The time now is 12:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands