Ceramic coated milltek 200 cell downpipe and r56 s turbo
Downpipe sold I also have a stock s turbo in good shape with 75k on it. Sold https://cimg0.ibsrv.net/gimg/www.nor...9813a4126.jpeg |
Turbo sale pending |
Turbo still available |
ttt
|
Bump |
I recently installed a miltek catted downpipe, like this one. It gives a nice burble, but is not obtrusive. No fitting issues during install. I'm running a factory JCW exhaust (with the large resonator). There is no drone in my setup (manic stage 1). And the butt dyno says there was a definite improvement in performance and response. Since I have a tune (plus a catted spacer), I haven't seen a CEL, but I believe that the tune would suppress it anyway.
I'm happy with the miltek catted dp. Good luck with sale. Have fun, Mike |
Originally Posted by mbwicz
(Post 4450544)
I recently installed a miltek catted downpipe, like this one. It gives a nice burble, but is not obtrusive. No fitting issues during install. I'm running a factory JCW exhaust (with the large resonator). There is no drone in my setup (manic stage 1). And the butt dyno says there was a definite improvement in performance and response. Since I have a tune (plus a catted spacer), I haven't seen a CEL, but I believe that the tune would suppress it anyway.
I'm happy with the miltek catted dp. Good luck with sale. Have fun, Mike |
Will it fit the 2099 S without any modifications? What i am asking I am on catless downpipe don't like the smell is it direct replacement what kind of power loss is expected?
|
It will fit without any modifications and will reduce the exhaust smell. Barely noticed a smell with this downpipe compared to the catless one i am running now. I cant speak for power loss.. I got 226whp with a manic stage 2 tune last may with this downpipe. |
|
Downpipe now on eBay. https://rover.ebay.com/rover/0/0/0?m...2F223396949818 |
20 hours left in the auction. Only 1 bid for $250 with no reserve. Good opportunity to get a great downpipe for way less then new. |
https://cimg1.ibsrv.net/gimg/www.nor...e4d4dd084b.jpg
it maybe the way picture is but if you look right above the lower bracket it looks like there is hole in the weld, is that just a shadow or there is one there? thank you |
No hole. Just deceptive weld. There are a couple spots like that https://cimg9.ibsrv.net/gimg/www.nor...c7ded26e9.jpeg |
Downpipe sold. Turbo still available |
Wanted to share buying experience here & on Ebay.
Great seller, quick shipping & packaging was top notch. Would buy from again. |
Turbo sold
|
All times are GMT -7. The time now is 06:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands