Hello,
I’m new here and I came with a question that might seem trivial to some, but for me it’s unanswered. I ordered 19-inch rims from the company Alutec. They called me this morning to say that these rims are not compatible with my car.
Can you advise me whether these rims will fit my F54?
I’m attaching a photo with the rims and specifications.
Best regards,
Bobo

 

The JCW Clubman can be had with 19x8 +57 wheels. The ones in your picture are only slightly wider with a similar offset, so I would expect them to fit. There is a very slight chance they might cause interference with the fenders, as the wheel will stick out ~13mm compared to stock.

What tire size were you planning? The F54 JCW tire size is 225/35-19

https://www.wheel-size.com/calc/?whe...cl=30mm&sr=0mm

 

I was planning to install 235/35 R19 tires.
I also intend to add lowering springs in the near future.
I’m wondering if everything will work well together, or if it might be better to look for a different setup?

 

I see they still have rims in 18-inch, maybe that would be a better choice?

 

I run 19x9 +32 so i'm 100% sure you can run these with no problem.

 

Thanks for the information, it’s good to know there won’t be any issues. I’ll call the company where I ordered the wheels tomorrow and tell them to ship them to me.