Hello everyone. New member here... have a 2005 MCS r52. Working on putting subframe back in and kid knocked over my bolt tray so now all my subframe bolts are all mixed up. Can anyone confirm or correct my thoughts please...

6 long bolts threaded 3/4 up. I think 4 are for the crash tubes and once on each side to attach subframe to body inside front wheel wells

2 Shorter boots with attached washers. I believe these are to attach subframe to body about halfway back on subframe.

Shorter bolts with no washer. I believe these attach the rear subframe (plates) to body.. three on each side.

Any help is appreciated.

 

This should help: http://www.realoem.com/bmw/enUS/show...53-Mini-Cooper S&diagId=31_0579

Go to Front Suspension, look at subframe and hardware panel on right.

 

Thank you!!!