Fender-well trimming for 37 offset wheel and 215/45-17 tire.

Reply Subscribe

Thread Tools

Search this Thread

May 11, 2004 | 02:02 PM

iDiaz

Thread Starter

Coordinator :: Motoring Underground Club Forum

Joined: Jan 2004

Posts: 222

Likes: 0

From: Encinitas, CA

Anybody have photos of Alex's mod to fit a 215/45-17 tire w/ a 37mm offset wheel?

Also, do you experience any other rubbing on the front or rear under hard cornering?

May 11, 2004 | 02:31 PM

minihune

OVERDRIVE - Racing Champion

Joined: Feb 2003

Posts: 15,262

Likes: 72

From: Mililani, Hawaii

Here is the thread. Get your dremmel out and have some fun.

https://www.northamericanmotoring.co...pic=6863&0

May 11, 2004 | 02:47 PM

sanddan

4th Gear

Joined: Jan 2003

Posts: 550

Likes: 0

From: Portland Oregon

I had some rubbing with 215-45-17 ES100 and 42 offset at the back part of the rear wheel wells. If you look you will see a bump in the plastic. It's pretty easy to trim. Good luck.