R50/53 Powerflex control arm bushing - for those who have them installed
Thread Starter
|
2nd Gear
Joined: Oct 2010
Posts: 56
Likes: 0
Powerflex control arm bushing - for those who have them installed
How did you manage to keep the end caps in place?
pix http://new.minimania.com/web/Item/NM...OPER%20%26%20S
pix http://new.minimania.com/web/Item/NM...OPER%20%26%20S
Joined: Feb 2003
Posts: 1,754
Likes: 36
From: Metro Detroit Area, Michigan
what is the question? they are on the inside.
it looks like this, my hand is the front of the car and this is the passenger side:
it looks like this, my hand is the front of the car and this is the passenger side:
__________________
Thread Starter
|
2nd Gear
Joined: Oct 2010
Posts: 56
Likes: 0
Ok so you have the end cap, insert, and the bushing. I thought the end cap you are holding goes on the other side of the bushing.
I'm assuming only the insert is flush the the bushing? End cap sticks out?
I'm assuming only the insert is flush the the bushing? End cap sticks out?
Joined: Feb 2003
Posts: 1,754
Likes: 36
From: Metro Detroit Area, Michigan
the insert goes between the control arm end plate and the bushing. it puts a nice surface for the bushing to ride on around the weld of the control arm. it also keeps the bushing 1 inside bushing 2. the other end doesn't need anything.
__________________
Thread
Thread Starter
Forum
Replies
Last Post
R50/53 Guidance on selling a 2005 S
Toolman
R50/R53 :: Hatch Talk (2002-2006)
8
Jan 20, 2016 06:50 AM
R50/53 2002 R53 Creaking/Clacking
maestro39
R50/R53 :: Hatch Talk (2002-2006)
3
Oct 27, 2015 02:38 PM
JPMontes3
R50/R53 :: Hatch Talk (2002-2006)
3
Aug 23, 2015 01:26 AM
PelicanParts.com
Vendor Announcements
0
Aug 4, 2015 02:45 PM