South East - Carolinas North and South Carolina

who Does Clutch jobs in NC?

Thread Tools
 
Search this Thread
 
Old Nov 2, 2008 | 10:02 AM
  #1  
evil_2's Avatar
evil_2
Thread Starter
|
1st Gear
Joined: Aug 2006
Posts: 37
Likes: 0
From: Goldsboro NC
who Does Clutch jobs in NC?

might need the clutch replace in my 04 MCS....it isnt slipping or anything just the chewbacca noise first thing in the morning. i am located in eastern NC and the mini dealer is 2.5 hours away in winston salem.

is there anyone in the eastern NC area that does clutches for a reasonable price and is reccomended?

thanks
Trevor
 
Reply
Old Nov 2, 2008 | 10:31 AM
  #2  
Warped1966's Avatar
Warped1966
5th Gear
Joined: Jan 2007
Posts: 615
Likes: 1
From: Norfolk, VA
Dan (I think) over at Grassroots Garage does that kind of work. He's in NC but I'm not sure exactly where.
 
Reply
Old Nov 13, 2008 | 04:04 AM
  #3  
SSSSSSSS's Avatar
SSSSSSSS
Coordinator :: M2C2
Joined: Nov 2005
Posts: 600
Likes: 1
From: Charlotte, NC
While Dan at Grassroots can do the job he's in Thomasville just off Business 85 south of High Point. One advantage to his place is you'll get to sample some local BBQ.
 
Reply
Old Nov 13, 2008 | 04:43 AM
  #4  
4Boogie's Avatar
4Boogie
all throttle no bottle
Joined: Jun 2008
Posts: 295
Likes: 1
From: Wilmington,NC
I'm having all my work done at National Speed here in Wilmington. Their rate is $80 per hour...a little better than Schaffer BMW. Plus they have the only dyno in town and their shop is incredible. They also have a BMW certified technician. http://www.nationalspeedinc.com/
 
Reply
Old Nov 13, 2008 | 05:26 AM
  #5  
minimarks's Avatar
minimarks
6th Gear
Joined: Jan 2007
Posts: 3,362
Likes: 1
From: Winston-Salem, NC
Another for Dan at Grassroots Garage!
 
Reply
Old Nov 13, 2008 | 07:48 PM
  #6  
MidnightDave's Avatar
MidnightDave
5th Gear
Joined: Jun 2006
Posts: 863
Likes: 0
From: UNCC area of Charlotte, NC
Dan has done all my non-warranty work, pulley, CAI, boost guage, injectors, brake stuff, exhaust...he also works on race MINIs and other race BMWs.

Give him a call if you're willing to make the drive...
 
Reply
Old Nov 14, 2008 | 06:54 PM
  #7  
Rich.Wolfson's Avatar
Rich.Wolfson
6th Gear
iTrader: (1)
Joined: Dec 2002
Posts: 1,266
Likes: 3
From: Northern New Jersey
Originally Posted by evil_2
S....it isnt slipping or anything just the chewbacca noise first thing in the morning....
The sound is NOT coming from the clutch. The sound is coming from the dual-mass flywheel so simply changing the clutch will not help the problem.

You can't go wrong with Grassroots and they will surely do the job right but you will need to figure in the cost of the flywheel too. Interestingly the noise does not lead to premature clutch wear or failure but is really annoying. Mine was replaced under warranty at 38,000 and every time I read a post of someone who has the problem out of warranty I am happy that mine went early. If I had to pay it would have been around $1800. I am sure Grassroots can do better than that.

Rich
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ECSTuning
Drivetrain Products
0
Sep 16, 2015 06:22 AM
ECSTuning
Vendor Classifieds
0
Sep 16, 2015 06:18 AM
ECSTuning
Vendor Announcements
0
Sep 14, 2015 12:48 PM
Sc00terbum
R50/R53 :: Hatch Talk (2002-2006)
2
Sep 11, 2015 09:07 AM
Mini Mania
Drivetrain Products
0
Sep 3, 2015 02:06 PM




All times are GMT -7. The time now is 03:20 PM.