R50/R53 :: Hatch Talk (2002-2006) Cooper (R50) and Cooper S (R53) hatchback discussion.

R50/53 saved by my mini

Thread Tools
 
Search this Thread
 
Old Aug 18, 2003 | 08:19 AM
  #1  
fuzzyface's Avatar
fuzzyface
Thread Starter
|
2nd Gear
Joined: Aug 2003
Posts: 103
Likes: 0
hey folks, new visitor here, i managed to survive this long and figured out that if i put it in my will (to be buried in my mini) that my better? half won't try to take advantage of my life ins. policy.
now for serious stuff. the socket needed for the oil filter, is it 32mm or 36mm and how deep can it be? any brand to buy or will one from my tool box work just as well?
 
Reply
Old Aug 18, 2003 | 08:24 AM
  #2  
MGCMAN's Avatar
MGCMAN
6th Gear
Joined: Jul 2002
Posts: 4,293
Likes: 2
From: Cincinnati, Ohio
36mm, as shallow as possible. I've found a cheepie brand (Huskey) at Home Depot / WallyWorld at about $7 per. 1/2 drive, so either a big ratchet or a reduction knuckle (adds to length, though) shall be in order.
 
Reply
Old Aug 18, 2003 | 08:42 AM
  #3  
Agro's Avatar
Agro
Coordinator :: Sin City MINI Club & AMVIV
Joined: Aug 2002
Posts: 4,587
Likes: 1
From: Las Vegas
36mm, I got mine at Sears for about $7.
Already had a 1/2" ratchet.
Easiest oil change I ever did. I like having the filter accessible from the top of the motor! I got much less oil in my eyes than I used to.
 
Reply
Old Aug 18, 2003 | 08:50 AM
  #4  
Donna/Mike's Avatar
Donna/Mike
Sand Dollar Collector
Joined: Aug 2002
Posts: 7,249
Likes: 2
From: Moved from Leesburg, VA to Oceanside, CA Nov. 2003
:smile:

Best part about Sears tools - if you buy a Craftsman - if it breaks, you get a new one for free.....

Chow!

Donna
donna@dcmetrominis.org
 
Reply
Old Aug 18, 2003 | 04:34 PM
  #5  
ovrkll's Avatar
ovrkll
2nd Gear
Joined: Jun 2003
Posts: 97
Likes: 0
From: Marietta, GA
>>hey folks, new visitor here, i managed to survive this long and figured out that if i put it in my will (to be buried in my mini) that my better? half won't try to take advantage of my life ins. policy.
>> now for serious stuff. the socket needed for the oil filter, is it 32mm or 36mm and how deep can it be? any brand to buy or will one from my tool box work just as well?


Is this the INFAMOUS "FuzzyFace" that ticketgtr has been referring to?


If so,,, check out all of our wonderful vendors that would be glad to help you make that Mini be one of a kind!



Cheers!
 
Reply
Old Aug 18, 2003 | 10:51 PM
  #6  
ticketgtr's Avatar
ticketgtr
2nd Gear
Joined: Aug 2003
Posts: 58
Likes: 0
From: ohio, usa
Now just a cotton pickin minute here!! Shame shame on ya for trying to corrupt him by luring him toward the vendors!! Everyone knows that a mini is just perfect as it is. Besides, I only got so many good parts left to sell!
Now, about the black bonnet stripe confusion. I just KNOW I typed in white stripes-- therefore, some mini gremlin must be hiding in this room and changing member posts!!! I've looked everywhere but no luck-- so somebody must be hiding the little bugger. SSOOOOO---- It's up against the wall, everybody ---- cavity search time!!! (pullin on rubber gloves) :smile: Us mini owners gotta luv each other
Next time I make choc chip cookies, I'll fax ya a dozen.
 
Reply
Old Aug 19, 2003 | 11:41 AM
  #7  
CharlesWil's Avatar
CharlesWil
5th Gear
Joined: Nov 2002
Posts: 818
Likes: 0
From: UA
ticketgtr
Thanks for taking time to say Hi. Send you love from the Rocket City and if old FF doesn't mind I'm ready for my search.
Charles
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wohnson89
R50/R53 :: Hatch Talk (2002-2006)
4
Jun 10, 2020 04:53 AM
OutMotoring
Vendor Announcements
0
Aug 10, 2015 12:15 PM
marendt428
MINI Parts for Sale
1
Aug 9, 2015 06:54 PM
ECSTuning
Vendor Announcements
0
Aug 7, 2015 08:02 AM
kwijmbo
R56 :: Hatch Talk (2007+)
5
Aug 5, 2015 09:00 PM




All times are GMT -7. The time now is 03:33 AM.