Drivetrain Alta SC Pulley Identification
Thread Starter
|
Neutral
Joined: Jul 2007
Posts: 8
Likes: 0
From: Bradenton, FL
Alta SC Pulley Identification
I've had my MCS for just over one week and only managed one speeding ticket so far (long story). 
Anyway, my MCS ('03) was modified by the previous owner and I would like to identify all the parts so I know what I am dealing with, and where to go from there.
I looked to find that there is already an Alta SC Pulley v.2.0 installed but I don't know what % reduction it is. Are there any markings on the pulley to help me identify it?
There is also an exhaust system I have yet to identify. I'll have to get some pictures to make it easier to ID.
Thanks in advance!
Anyway, my MCS ('03) was modified by the previous owner and I would like to identify all the parts so I know what I am dealing with, and where to go from there.
I looked to find that there is already an Alta SC Pulley v.2.0 installed but I don't know what % reduction it is. Are there any markings on the pulley to help me identify it?
There is also an exhaust system I have yet to identify. I'll have to get some pictures to make it easier to ID.
Thanks in advance!
5th Gear
Joined: Jan 2006
Posts: 635
Likes: 0
From: Grasonville, MD
On my 17% V2 the % is stamped under the cover.
I've had my MCS for just over one week and only managed one speeding ticket so far (long story).
Anyway, my MCS ('03) was modified by the previous owner and I would like to identify all the parts so I know what I am dealing with, and where to go from there.
I looked to find that there is already an Alta SC Pulley v.2.0 installed but I don't know what % reduction it is. Are there any markings on the pulley to help me identify it?
There is also an exhaust system I have yet to identify. I'll have to get some pictures to make it easier to ID.
Thanks in advance!
Anyway, my MCS ('03) was modified by the previous owner and I would like to identify all the parts so I know what I am dealing with, and where to go from there.
I looked to find that there is already an Alta SC Pulley v.2.0 installed but I don't know what % reduction it is. Are there any markings on the pulley to help me identify it?
There is also an exhaust system I have yet to identify. I'll have to get some pictures to make it easier to ID.
Thanks in advance!
5th Gear
Joined: Feb 2005
Posts: 654
Likes: 0
From: East SF Bay Area, CA
I don't have an Alta V2 pulley, but I also have the impression that the reduction percentage is stamped into the pulley - all you need to do is remove the red cover to see it.
A look at this installation video can probably help to clarify:
http://www.motoringfun.com/2007/04/1...ulley-install/
A look at this installation video can probably help to clarify:
http://www.motoringfun.com/2007/04/1...ulley-install/
Thread
Thread Starter
Forum
Replies
Last Post