JCW or Recaro Seats
Hey, does anyone know where to find these seats? I really like how the rear seats are designed. show me some pics if u got them. thanks
|
Originally Posted by omar510
Hey, does anyone know where to find these seats? I really like how the rear seats are designed. show me some pics if u got them. thanks
|
well... i think someone here does have em but i think he sold them
likely, you want them done, you need to get them from europe... |
I do not have these installed in the Mini but………if you’re considering aftermarket seats, I recommend the Corbeau Brand over Recaro.
I spent lots of time looking at racing seats and have sat in all of them. Originally I was going to go with the Recaro or Momo brand but after a back-to-back comparison, The Corbeau was way better for comfort and fit, plus they are priced quite a bit cheaper. I have owned cars with the Recaros and I have always liked the firm feel, which keeps you refreshed after several hours in the seat, so I know they are a premium seat. I have had the “CR-1” style now for a few years and it still looks new. http://www.corbeau.com/prod_index/prod_index.shtml |
I've got two Sparco Milano Prestige seats (warning, retails at $1599 per seat).
The same as the JCW seats minus the JCW logo and the two tone leather and heat (I am looking into how to get the heating module). These pics show only one installed........I just installed the second one last week.... I love 'em, and in combination with the Schroth harness, you can't get a tighter seat...... http://www.nemini.org/modules/copper..._installed.jpg http://www.nemini.org/modules/copper..._side_view.jpg |
Do these flip forward to allow access to the rear seat? How do you deal with the weight sensor in the passenger side seat (maybe yours isn't an '05)?? Just wondering as I was looking at getting the JCW version from the EU, but may go with the US version just for ease of aquiring them.
Joel
Originally Posted by LordOfTheFlies
I've got two Sparco Milano Prestige seats (warning, retails at $1599 per seat).
The same as the JCW seats minus the JCW logo and the two tone leather and heat (I am looking into how to get the heating module). These pics show only one installed........I just installed the second one last week.... I love 'em, and in combination with the Schroth harness, you can't get a tighter seat...... http://www.nemini.org/modules/copper..._installed.jpg http://www.nemini.org/modules/copper..._side_view.jpg |
Originally Posted by jfunkmd
Do these flip forward to allow access to the rear seat? How do you deal with the weight sensor in the passenger side seat (maybe yours isn't an '05)?? Just wondering as I was looking at getting the JCW version from the EU, but may go with the US version just for ease of aquiring them.
Joel So you have to first slide the seat all the way forward and the flip. And because of the side bolsters on the seat cushion and seat back, it does not flip foward by very much. It's not meant for constant rear seat access. Most of the time I go through the trunk. |
Good to know. Think I will be getting only one Milano 2 as I need to get to the back from the passenger side for my boy's carseat!
|
Milano 2 is the leather version of the Milano and the one I have is the Milano Prestige.
Fyi the Milano 2 doesn't come with the thigh support adjustment. Don't know if they make the Milano 2 anymore though...But good luck! |
I have the Sparco Torino's in mine...like the Milano. I love them to death. Got them from a kick @ss person on this board (new).
http://img.photobucket.com/albums/v6...K/100_0084.jpg |
For your information (and maybe to save you money) if I had to do it again I wouldn't get the Prestige version. I did just to get the adjustable thigh support but in retrospect it was a waste of money. I always keep mine in the retracted position becausee if you extend it, the gap between the bolster and the seat squab falls right under your upper thigh. Which means it's very uncomfortable - like sitting on a chair with a hole in it. I don't know who designed these seats but (no pun intended) he obviously didn't sit in one.
Alan |
UK-
You gonna be at the DMC Christmas party this weekend??? If so maybe I could take a look at your seats. I was a thinkin' about the blue Milano 2 (alcantara mmm..) or the Torino's but wanted to make sure it was a dark enough blue.
Originally Posted by UKSUV
I have the Sparco Torino's in mine...like the Milano. I love them to death. Got them from a kick @ss person on this board (new).
http://img.photobucket.com/albums/v6...K/100_0084.jpg |
Originally Posted by UKSUV
I have the Sparco Torino's in mine...like the Milano. I love them to death. Got them from a kick @ss person on this board (new).
http://img.photobucket.com/albums/v6...K/100_0084.jpg |
I have been looking at seats for quite awhile and all though I liked the side grab of the Sparko's the seat bottom seemed a little thin and perhaps not condusive to a long trip. I found a set or Recarro Topline that had a nice compromise between comfort and seat posistion suport. So far they are my number one pick but I will look into Corbeau as well.
|
I sat in the cobearu legacy yesterday and felt those were the most comfy!
400 buck for the seat seems like a great price! I'm thinking about getting one in black morcorfiber :thumbsup: |
Originally Posted by FlynHawaiian
I sat in the cobearu legacy yesterday and felt those were the most comfy!
400 buck for the seat seems like a great price! I'm thinking about getting one in black morcorfiber :thumbsup: |
Originally Posted by conehead
I have been looking at seats for quite awhile and all though I liked the side grab of the Sparko's the seat bottom seemed a little thin and perhaps not condusive to a long trip. I found a set or Recarro Topline that had a nice compromise between comfort and seat posistion suport. So far they are my number one pick but I will look into Corbeau as well.
|
Originally Posted by jblow
Did you happen to try out a Recaro Speed? I sat in a Topline and liked it, but am looking for a little more aggressive bolstering.
that said, i got this one... instead of 2, i just needed the one, so here it is: https://www.northamericanmotoring.co...02116_1615.JPG |
Originally Posted by jfunkmd
UK-
You gonna be at the DMC Christmas party this weekend??? If so maybe I could take a look at your seats. I was a thinkin' about the blue Milano 2 (alcantara mmm..) or the Torino's but wanted to make sure it was a dark enough blue. |
Originally Posted by jblow
How do the Torinos do for lateral support in the shoulder area? Did you consider other brands - just interested in thoughts on pros / cons of different options. Am only able to find Sparcos to try out locally - Recaro dealer only has 3 seats, none of which I'm interested in. Corbeau dealer only has 1 seat, a race shell. Am leaning towards Recaros, but really would like to be able to sit in one before making a decision..
|
All times are GMT -7. The time now is 11:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands