De-chroming Exterior
I've tried googling what I was looking for and although I found a couple of websites that offer these embellishments, but does anyone had experience or know of which has a better quality? I've asked my MA to order the Black Line, but that only covers the head/taillights. I'd like to go further and de-chrome the handles (w/comfort access), the gas cap and possibly the grill. OutMortoring.com offers them, but I don't know if their quality is that good considering their ratings is subpar.
|
Originally Posted by mcoopers81
(Post 4112569)
I've tried googling what I was looking for and although I found a couple of websites that offer these embellishments, but does anyone had experience or know of which has a better quality? I've asked my MA to order the Black Line, but that only covers the head/taillights. I'd like to go further and de-chrome the handles (w/comfort access), the gas cap and possibly the grill. OutMortoring.com offers them, but I don't know if their quality is that good considering their ratings is subpar.
I have the OEM MINI Black head light and tail light trim rings. I ordered them from ECS Tuning. As far as replacing the handles and gas cover, I don't think you can. But there are various overlay products you can buy and apply. I have the CARBONMINI genuine carbon fiber gas cap overlay, and I have their carbon fiber handle overlays (with comfort access) arriving today, actually. I don't think there are ways of replacing those entire parts, unless you buy a chrome replacement part, and paint it yourself? |
Originally Posted by Phantogram
(Post 4112595)
I have the OEM MINI Black head light and tail light trim rings. I ordered them from ECS Tuning. As far as replacing the handles and gas cover, I don't think you can. But there are various overlay products you can buy and apply. I have the CARBONMINI genuine carbon fiber gas cap overlay, and I have their carbon fiber handle overlays (with comfort access) arriving today, actually. I don't think there are ways of replacing those entire parts, unless you buy a chrome replacement part, and paint it yourself?
|
Originally Posted by Phantogram
(Post 4112595)
I have the OEM MINI Black head light and tail light trim rings. I ordered them from ECS Tuning. As far as replacing the handles and gas cover, I don't think you can. But there are various overlay products you can buy and apply. I have the CARBONMINI genuine carbon fiber gas cap overlay, and I have their carbon fiber handle overlays (with comfort access) arriving today, actually. I don't think there are ways of replacing those entire parts, unless you buy a chrome replacement part, and paint it yourself?
|
Originally Posted by maytulip32
(Post 4112607)
How much were the CARBONMINI handles and fuel cap? I went to their website but couldn't find prices.
Originally Posted by mcoopers81
(Post 4112637)
Yes. The overlays. That's what I mean. I apologize for not being specific. I'm just concerned because I know there's not much you can do other than overlay the product over the handles/gas cap but I've seen pictures where they are being held by just 3M adhesive strips? Will that even hold overtime? And my other concern is the quality of the plastic. Please let me know how yours stands up.
My Carbon Fiber overlays are genuine carbon fiber, so they're durable and suuuuper thin. They are held on with thin D/F tape and high-bond glue. Those pieces aren't going anywhere. I also have the emblem overlays, installed with the same methods. They are extremely quality overlays and look stock when installed on the car. :) Here are a couple pics of mine. I haven't installed the handles yet, as they just arrive today. https://cimg6.ibsrv.net/gimg/www.nor...c372b9566c.jpg carbon fiber emblems from CARBONMINI https://cimg5.ibsrv.net/gimg/www.nor...0aaeb06a13.jpg carbon fiber fuel cap from CARBONMINI |
Originally Posted by Phantogram
(Post 4112641)
As far as the trim rings, they are actual replacements, not overlays. They have clips that mount just like the stock chrome ones do, so they won't be going anywhere.
My Carbon Fiber overlays are genuine carbon fiber, so they're durable and suuuuper thin. They are held on with thin D/F tape and high-bond glue. Those pieces aren't going anywhere. I also have the emblem overlays, installed with the same methods. They are extremely quality overlays and look stock when installed on the car. :) Here are a couple pics of mine. I haven't installed the handles yet, as they just arrive today. https://cimg6.ibsrv.net/gimg/www.nor...c372b9566c.jpg carbon fiber emblems from CARBONMINI https://cimg5.ibsrv.net/gimg/www.nor...0aaeb06a13.jpg carbon fiber fuel cap from CARBONMINI |
I went gloss black to match my car. The front and rear trim rings are replacements. The door handle and gas cap are overlays. My next step is the belt line. I wish they had covers for the chrome headlight washers. I haven't found them yet. If you want to see pics. PM me.
|
I have the overlays for the door handles and gas cap. I also have the trim rings for the tails and headlights. Mine are from Outmotoring and the quality is as good as any overlays you will get (other than Carbon Fiber). The handle cover actually clip around and tape on. No worries with them coming off.
https://cimg2.ibsrv.net/gimg/www.nor...a7dde4cdf9.jpg |
Originally Posted by GreyNation
(Post 4112866)
I have the overlays for the door handles and gas cap. I also have the trim rings for the tails and headlights. Mine are from Outmotoring and the quality is as good as any overlays you will get (other than Carbon Fiber). The handle cover actually clip around and tape on. No worries with them coming off.
https://cimg2.ibsrv.net/gimg/www.nor...a7dde4cdf9.jpg |
:thumbsup: You're welcome.
Originally Posted by mcoopers81
(Post 4112930)
Very nice! I may go with OutMotoring then. Thanks!
|
Where do u get the black grill surround pieces ?
thxs |
Originally Posted by RDSJCW
(Post 4113006)
Where do u get the black grill surround pieces ?
thxs |
Thxs,
just ordered the black grill trim. Was $140.00 shipped to USA. |
I've been eyeing up the handle and gas lid covers on OutMotoring but was concerned about the durability of the install.
Glad to hear from someone who actually has them, guess I know who's getting (more of) my money today :D |
+1
|
1 Attachment(s)
I purchased CF comfort access door handles, gas cap & surround along with front & rear Mini wings for my Johnny when it arrives nxt. month From carbonmini.com
Here are the web prices they sent me: "For the F56, we have the following premium carbon fiber upgrades. Listed are our factory-direct web prices. Additional discounts may apply depending on the part, size of order or special promotion. " Available Now CF Door Handle Overlay Kit = $180 ($190 for Comfort Access Version) CF Sport Fuel Cap Overlay Kit = $180 CF Wing Emblem Overlay Kit = $160 In Production - Available for Preorder w/Discount CF Headlight Trim Overlay Kit = $275 CF Tail Light Trim Overlay Kit = $250 CF Mirror Cap Overlay Kit = $395 In Development - Accepting Reservations CF Boot Handle Overlay Kit CF Steering Wheel Insert Overlay Kit CF Dashboard Overlay Kit Best, Erin erin@carbonmini.com www.carbonmini.com |
Originally Posted by GreyNation
(Post 4112866)
I have the overlays for the door handles and gas cap. I also have the trim rings for the tails and headlights. Mine are from Outmotoring and the quality is as good as any overlays you will get (other than Carbon Fiber). The handle cover actually clip around and tape on. No worries with them coming off.
https://cimg2.ibsrv.net/gimg/www.nor...a7dde4cdf9.jpg |
Originally Posted by xpunisherx
(Post 4113540)
What did you use to black out the chrome trim below the windows all around the car? Your ride looks great BTW!!!
|
Yes, must have the blacked out window body waist line trim too!!:thumbsup:
|
Probably black vinyl wrap
|
Originally Posted by xpunisherx
(Post 4113540)
What did you use to black out the chrome trim below the windows all around the car? Your ride looks great BTW!!!
|
Originally Posted by GreyNation
(Post 4113653)
Thanks!:thumbsup: I used vinyl belt line tape from outmotoring.com.
|
Originally Posted by xpunisherx
(Post 4114715)
Thanks for the information. I ordered mine. How is it holding up on your car? Any tips for installation?
Go slow and don't stretch the tape. Line the top of the tape up with the edge of the top rubber piece and smooth out small sections at a time. I cut a hair over the length for each section and peel the backing as I go. You will be fine just take your time. |
Originally Posted by Phantogram
(Post 4112595)
Thanks for the orders , looks great. |
All times are GMT -7. The time now is 03:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands